![]() |
![]() | #1 |
Not Yet Wild ![]() Join Date: Jan 2016 Location: New Smyrna Beach, FL
Posts: 44
| ![]() What size ring terminals are y'all using for the small tap connections and the large lug connections on the Leaf modules to connect up to the Zeva? 22 AWG wire good? I plan to order up some good quality marine tinned wire and terminals and would like to get it right the first time! TIA! |
![]() | ![]() |
![]() | |
![]() __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
![]() | #2 |
Not Yet Wild ![]() Join Date: Jan 2016 Location: New Smyrna Beach, FL
Posts: 44
| ![]() Sorry, worded that title wrong but can't figure out how to edit it. I'm looking for the ring terminal sizes on the Leaf modules, not the Zeva. |
![]() | ![]() |
![]() | #3 |
Not Yet Wild Join Date: Jun 2016
Posts: 13
| ![]() From other users write ups, it seems like they are using 20AWG. For the ring terminals, MCJEFE stated that the bolts were M8 and the screws were M6. For M8, you'd want a terminal that fit a 5/16" bolt which should be one of the blue terminal made for 16AWG. |
![]() | ![]() |
![]() | #4 | |
Gone Wild ![]() ![]() Join Date: Sep 2014 Location: Orlando, FL
Posts: 780
| ![]() Quote:
This should be Red (16ga to 22ga) 5/16" ring terminal for the M8 bolt and #10 ring for the M6 screw. The Blue terminals are for 16-14 ga, too large for the 20ga tap harness. | |
![]() | ![]() |
![]() | #5 |
Not Yet Wild ![]() Join Date: Jan 2016 Location: New Smyrna Beach, FL
Posts: 44
| ![]() Thanks, guys! |
![]() | ![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() | ||||
Thread | Forum | |||
Ring terminal - Lowe's? | Electric Club Car | |||
Ring Terminal help | Electric EZGO | |||
Ring terminal with spade lug? | Electric EZGO | |||
What size ring connectors on F&R Switch? | Electric Club Car | |||
G16 ring end gap size?? | Gas Yamaha |