lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Extreme DC! > All things Lithium


Post New Thread  Reply
Thread Tools Display Modes
Unread 06-22-2019, 06:02 PM   #1
Getting Wild
 
Join Date: Sep 2012
Posts: 137
Default Correct orientation for Nissan Leaf Modules and plates?

Before I get these all strung up, can you guys please confirm if this is the correct use of these plates? Iím talking about the original braces / end plates and spacers. I have four endplates. Two with this seemingly useless tab sticking out (near the terminals with a hole for some random bolt that would not ha e an application in my cart) and two without. The spacers I assume must go like I ha e them, but it seems sloppy. Thanks
somfas is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-22-2019, 06:10 PM   #2
Getting Wild
 
Join Date: Sep 2012
Posts: 137
Default Re: Correct orientation for Nissan Leaf Modules and plates?

I can’t find a way to upload rom my phone. Sorry. Is there any links to proper assembly? I searched and couldn’t find anything. Thx
somfas is offline   Reply With Quote
Unread 06-23-2019, 07:15 AM   #3
Getting Wild
 
Join Date: Sep 2012
Posts: 137
Default Re: Correct orientation for Nissan Leaf Modules and plates?

I can't find a way to delete this thread unfortunately. However, for anyone looking at this for reference, I have found comments in threads here that the factory spacers are not that important. In these Gen 1 modules, you can use regular washers if you don't have the spacers. With that in mind, I would assume the correct orientation of these factory spacers is irrelevant. I still am not sure of the correct installment of the end plates, however there are many people using aluminum and plywood end plates, so I assume that doesn't matter either; as long as they are squeezed together. I remember seeing a thread awhile back that gave the measurements of the modules before and after the endplates applied the proper "squeeze". There is also this thread about boxes. Let's see your lithium boxes!
somfas is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Extreme DC! > All things Lithium


Thread Tools
Display Modes


Similar Threads
Thread Forum
Want 7 more Leaf Modules...knew this would happen Lithium EZGO
Nissan Leaf batteries set up. Lithium Club Car
Parallel Nissan Leaf Modules All things Lithium
Nissan leaf pack help Lithium EZGO
Sourcing Leaf Battery Modules All things Lithium


All times are GMT -5. The time now is 10:02 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.