Solid Brass OBC stud kits

scottyb · 07-12-2017, 05:50 PM

Solid Brass OBC stud kits. Club Car DS and Precedent all years. You asked for it. We got it

see item #14 > Scottyb's solid brass stud kit

lockman1 · 07-12-2017, 08:22 PM

07-16-2017, 06:01 PM

jakesnake27 · 07-18-2017, 11:28 AM

Very nice

Ms506s · 09-20-2017, 05:12 PM

Scottyb, I just ordered this, should have it tomorrow. We took the old stud in the OBC and left the cables on it and it is hooked up to the altrax controller. Should I undo that, get those cables hoooked up to the new OBC stud to the controller? I know I have to cut the cable going from the battery to the controller, hook it up to the one side of the stud, then from the other side of the stud to the controller. But the wires that were on the old stud are on the stud still, wired right into the controller, so there is no connection through the obc until I hook it up again. Just trying to think of the easiest way to do this.

jakesnake27 · 09-21-2017, 07:59 PM

The OBC only affects charging, so the cart will run just fine, it just won't charge properly. Once you get the new stud, you can wire it up correctly, through the OBC.

07-12-2017, 08:22 PM	#2
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,931	Re: Solid Brass OBC stud kits

07-16-2017, 06:01 PM	#3
crash test dummy Guest Posts: n/a	Re: Solid Brass OBC stud kits
crash test dummy Guest Posts: n/a

07-18-2017, 11:28 AM	#4
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245	Re: Solid Brass OBC stud kits Very nice
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245

09-20-2017, 05:12 PM	#5
Ms506s Gone Wild Join Date: Jun 2017 Location: Florida Posts: 165	Re: Solid Brass OBC stud kits Scottyb, I just ordered this, should have it tomorrow. We took the old stud in the OBC and left the cables on it and it is hooked up to the altrax controller. Should I undo that, get those cables hoooked up to the new OBC stud to the controller? I know I have to cut the cable going from the battery to the controller, hook it up to the one side of the stud, then from the other side of the stud to the controller. But the wires that were on the old stud are on the stud still, wired right into the controller, so there is no connection through the obc until I hook it up again. Just trying to think of the easiest way to do this.

09-21-2017, 07:59 PM	#6
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245	Re: Solid Brass OBC stud kits The OBC only affects charging, so the cart will run just fine, it just won't charge properly. Once you get the new stud, you can wire it up correctly, through the OBC.
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Brass for Reloading	Hunting and Fishing Supplies
Wheel stud spacers / or solid spacers	Gas EZGO
brass allthread through obc	Electric Club Car
4 Stud to 5 Stud Adaptors / Hubs	Design Center