Vegas carts exhaust. Problem

chriskent85

Has anyone else had any problem fitting their exhaust from vegas carts. I just got the lift installed on my workhorse with an 18hp vanguard. Bottom 2 holes line up but the top 2 are bout 1/4 in off. Im wondering if they sent me the 22HP briggs exhaust. even the flanges are too big. Had me questioning myself on what size motor i had and had to check the model #.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

slonomo

Did you call Vegas Carts? Send them those photos or direct them to the thread. What kind of engine do you have?

chriskent85

I just tried to install it this morning. So no i havent been able to call them yet. they probably dont open till 12 pm my time. Its a 18hp vanguard. They dont offer a 18hp on their website but i emailed in the order and they said they had the 18HP

chriskent85

I take that back, they dont open till 10am which is 1pm my time.

chriskent85

Got off the phone with them and they are checking to see if the 18hp has the same exhaust as the 23hp.

Vinny73

I'm glad you just brought up this point. I just received my big block conversion from them for a Vanguard 18hp. So I will go check my exhaust as well. Hope it's a simple fix. Hope the waiting isn't to bad either.

Vinny73

Also, my exhaust is silver not black.

chriskent85

I might just cut the flanges off and move them and re weld them. I think it might be too much hassle sending this one back and waiting for another. They told me they didn't have an 18hp there to use for a templet.

Vinny73

Then I better get on checking mine for fitment!

Vinny73

Sure enough!!!! My pipe flanges are too large, and the centerlines of the header is about 1/2" too long!