|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
09-07-2015, 08:12 PM | #1 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Anyone using a 1 1/4 wide belt with a comet 780?
Just wondering if anyone is using a 1 1/4 wide belt with a comet 780. I know it calls for a 1 3/16. I want to know if I use the wider belt if I will have problems sitting still at idle? I'm currently using an Ezgo belt that is 1 1/8. I want something wider. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-07-2015, 08:22 PM | #2 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Anyone using a 1 1/4 wide belt with a comet 780?
I would stick with 1-3/16. It may sit ok at idle but it would change the engagement rpm. Maybe quite a bit. Are you having trouble finding an 1-3/16 the right length or something?
|
09-07-2015, 08:35 PM | #3 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: Anyone using a 1 1/4 wide belt with a comet 780?
I've heard of a few members on here saying that they use a 1 1/4 wide belt to make up for wear on their secondary clutch. My secondary isn't new but it's not in bad shape either. Just wondering if I would have a problem at idle. I'm probably just going to get a 1 3/16.
|
09-08-2015, 06:47 AM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: Anyone using a 1 1/4 wide belt with a comet 780?
I have actually tried that Gary. I get my belts at the local John Deere dealer and they were out of the one I needed so I tried the larger one, same diameter but 1 1/4". I had to back the engine up just a hair, which isn't a problem on mine since I have slots on the cradle.
It makes engagement very snappy, still have neutral but not much. When it was brand new it would grab quite a bit and have a little bit of a lurch at idle. Had to keep my foot on the brake to stop it from inching forward. Once it wore in it was fine. It seemed to have more low end pull too, although I never climbed any mountains with that belt. Shortly thereafter I spilled oil on it and had to replace it. I don't know if I'll get another though. My setup works so smooth with the 1 3/16" belt. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Comet Clutch stuck wide open | Clone Engine Swaps | |||
Wide belt part number | Gas Yamaha | |||
Need 1" wide drive belt. | Clone Engine Swaps | |||
need a comet belt 203783 | Golf Carts and Parts | |||
Comet 780 Belt size | Big Block Talk! |