|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
04-01-2016, 07:28 PM | #1 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Need a measurment...
Could I ask one of my Briggs (16 to 20hp) brothers to take a measurment for me? Need a measurment from the "outward" edge of the intake manifold to the fan shroud. This set up would have the carb "outward" of the engine, like my twin set up. Working on a single Mikuni set up and need to know if it will clear the shrouding. Also, any thoughts about if the "spacer" between the intake manifold and intake adapter is really needed. Thanks Dave
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-02-2016, 06:07 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Need a measurment...
Sorry Dave, wish I could help you. You can always call Tom at CPP.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-02-2016, 06:35 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Need a measurment...
I'm pretty shure the measurement on your 23HP would be the same or very close. Thanks for repling tough
|
04-02-2016, 06:54 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Need a measurment...
I will be happy to check that for you. Hopefully tomorrow afternoon will be ok.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-03-2016, 02:05 PM | #5 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Need a measurment...
On the 23 hp it looks like 2-11/16" to 2-3/4" Hope this helps buddy.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-03-2016, 03:08 PM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Need a measurment...
Thanks Ron Looks like it will work. CC-John or anyone else, should I use the spacer between the intake and intake manifold? Some pix's.
|
04-03-2016, 06:22 PM | #7 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: Need a measurment...
For the size of that work bench, I'd say you need more carburation...
|
04-03-2016, 06:41 PM | #8 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Need a measurment...
I always wondered how come more people haven't done something like this. I'm excited to see how this runs out.
|
04-03-2016, 07:30 PM | #9 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Need a measurment...
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-03-2016, 09:02 PM | #10 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,642
|
Re: Need a measurment...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
need txt cowl measurment please help | Gas EZGO | |||
measurment of jakes lt width | Lifted Golf Carts |