|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
05-05-2017, 07:51 AM | #1 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Severe Duty Belt W/ Jakes Honda Conversion
Anyone know of or where to get a severe duty drive belt for the jakes Honda conversion kit. Looking for a friend. He has a 2000 Club Car with Jakes Honda conversion kit using both OEM club car clutches. It takes a different length belt than stock. Jakes part number is 7222. I Called and spoke with jakes and they told me the length of the belt is 45-3/8" x 1" wide. Didn't see anything his size in Erlandson Gboost catalog...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-05-2017, 08:35 AM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Severe Duty Belt W/ Jakes Honda Conversion
Try giving Bruce a call at CPP, >>http://www.cartpartsplus.com/
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
05-06-2017, 01:16 PM | #3 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: Severe Duty Belt W/ Jakes Honda Conversion
Far as I know there is only two belts for 1", one is stock CC one is for some swaps I think CPP has them. If there is more please tell us lot of people dig for them the 1" is tough setup that way.
|
05-06-2017, 04:37 PM | #4 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Severe Duty Belt W/ Jakes Honda Conversion
I emailed gboost and got a response from Glenn Erlandson. He said they do not offer a belt in that length and tols me to check with vegas carts or Dixie sales which is cpp. The severe duty belt listed on CPP website for the clone swaps is only 42"... (The motor he has is an actual Honda GX630)
|
05-06-2017, 05:32 PM | #5 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: Severe Duty Belt W/ Jakes Honda Conversion
There are two 1" belts, one is stock CC and one is for swaps but I don't know the size. You will have to move the engine if you can't get the right size, or convert the clutches to 1 3/16 they have all kinds of sizes.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Severe Duty Belt | Gas Club Car | |||
Severe Duty Belt or Standard belt ??? | Gas EZGO | |||
Severe Duty Belt/clutch kit | Gas Club Car | |||
Severe duty belt and performance springs | Gas Club Car | |||
severe duty belt | Gas Yamaha |