Vegas Carts Tach

Chris15005

Anyone tried one yet? I saw them announce it on Facebook and i ordered one seems easy to hook up should be installing it this weekend.

http://www.vegascarts.com/category-s/1883.htm

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

ironmonkey17

I would think it works good, their name is on it, too bad I bought a equus 8068 about a month ago, the equus is twice the price, let us know how it works..

Aqua-Stitch

following...
Considering a tach for the rest of this season. For sure next year when I put in a new engine.

Chris15005

Works great install was easy thanks Vegas Carts

[IMG]Tach https://imgur.com/gallery/MYldG[/IMG]

ironmonkey17

I might have fried my EQUUS 8068, my starter/gen started putting out over 17 volts again, it took me a long time to get it to work right last time, once I figure it out I'll be looking into one of these tachs if its fried..

Chris15005

Not sure why the mobile links don't work but let's try this again





Operating video https://imgur.com/ifCh3j9

Operating video https://imgur.com/JeFrmWH

raydhd

Nice

Chris15005

It worked well all weekend no hiccups no wild swinging of the tach only thing i wash they included was the hose clamp to attach to column where probably 90% of people will install it.

luvdamud

Chris, I just got mine on Saturday and it did come with a hose clamp. Yours must have gotten packed right before quitten' time. I hope to put it on one evening this week. BTW, I love your warning sticker!

Shepard

I've been thinking about trying one of these because I've stretched my ride about 10 inches and the Equus tach sensor cable is going to be to short. I'm been dreaming up my wiring schematic to include a few things like turn signal and some different front lights. Wiring in the VC tach would be very easy. It can all be done in the dash board itself. Some people may run a wire to the coil and wire in a connector for the signal at the engine. If you run a clone and your key switch grounds the coil -- there ya go - signal wire already in place and you can do the in dash wiring. That I think is way cool.