|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
12-20-2017, 08:45 PM | #1 |
Not Yet Wild
Join Date: Jun 2017
Posts: 65
|
vc 625 in a g2
got started on the g2 625 build I moved the swing arm back 2" and down 2" and am using a jakes lt lift.The set back looks ok but I think i need to raise it another inch what do you guys think.The tires are 25x1000x12.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-20-2017, 08:47 PM | #2 |
Not Yet Wild
Join Date: Jun 2017
Posts: 65
|
Re: vc 625 in a g2
forgot to upload the pics
|
12-20-2017, 08:49 PM | #3 |
Not Yet Wild
Join Date: Jun 2017
Posts: 65
|
Re: vc 625 in a g2
one more time
|
12-20-2017, 11:09 PM | #4 |
Gone Wild
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,955
|
Re: vc 625 in a g2
Probably need more air in the fenders even just for after the weight of the cart rests on the springs. I would give it at least another 2". Unless you are going to do some serious trimming on the trailing edge of the fenders.
|
01-04-2018, 10:36 AM | #5 |
Gone Wild
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,955
|
Re: vc 625 in a g2
How's it going with the G2 conversion?
|
01-04-2018, 10:45 AM | #6 |
Morel Man
Join Date: Nov 2014
Location: Northeast Oklahoma
Posts: 568
|
Re: vc 625 in a g2
If you'll rotate the photos on your computer they'll display right on here,
Just saying Oh and yes it looks good but I think you'll need more air between the tires and body so either trim or raise. Breathlessly waiting to read about the engine going in. Peace |
01-04-2018, 11:12 AM | #7 |
Not Yet Wild
Join Date: Jun 2017
Posts: 65
|
Re: vc 625 in a g2
I will post some pics this evening
|
01-04-2018, 11:56 AM | #8 |
Gone Wild
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,955
|
Re: vc 625 in a g2
Great. We were afraid you got sucked into the air box of that big motor, never to be heard from again.
|
01-04-2018, 12:10 PM | #9 |
Not Yet Wild
Join Date: Jun 2017
Posts: 65
|
Re: vc 625 in a g2
havn't even fired this one up yet been doin alot of fabbing on suspension,brakes, new drivin clutch and battery box.I actually have motor back out and working on the body so I can get the wiring done.I may get it fired up the weekend.
|
01-04-2018, 09:18 PM | #10 |
Not Yet Wild
Join Date: Jun 2017
Posts: 65
|
Re: vc 625 in a g2
here are some pics of the progression on the g2 jakes long travel and discs brakes on front,rear suspension raised up,exhaust done still have to do electrical, intake/ filter and put engine back in and get running.Then a rear bumper and tare down for paint.still on the fence for what to do for a windshield top I have an extra txt top may see if i can make that work.Still have a lot of work to do
|