vc 625 in a g2

tireguy · 12-20-2017, 08:45 PM

got started on the g2 625 build I moved the swing arm back 2" and down 2" and am using a jakes lt lift.The set back looks ok but I think i need to raise it another inch what do you guys think.The tires are 25x1000x12.

tireguy · 12-20-2017, 08:47 PM

forgot to upload the pics

tireguy · 12-20-2017, 08:49 PM

one more time

Rooster59 · 12-20-2017, 11:09 PM

Probably need more air in the fenders even just for after the weight of the cart rests on the springs. I would give it at least another 2". Unless you are going to do some serious trimming on the trailing edge of the fenders.

Rooster59 · 01-04-2018, 10:36 AM

How's it going with the G2 conversion?

David Maner · 01-04-2018, 10:45 AM

If you'll rotate the photos on your computer they'll display right on here,

Just saying

Oh and yes it looks good but I think you'll need more air between the tires and body so either trim or raise.

Breathlessly waiting to read about the engine going in.

Peace

tireguy · 01-04-2018, 11:12 AM

I will post some pics this evening

Rooster59 · 01-04-2018, 11:56 AM

Great. We were afraid you got sucked into the air box of that big motor, never to be heard from again.

tireguy · 01-04-2018, 12:10 PM

havn't even fired this one up yet been doin alot of fabbing on suspension,brakes, new drivin clutch and battery box.I actually have motor back out and working on the body so I can get the wiring done.I may get it fired up the weekend.

tireguy · 01-04-2018, 09:18 PM

here are some pics of the progression on the g2 jakes long travel and discs brakes on front,rear suspension raised up,exhaust done still have to do electrical, intake/ filter and put engine back in and get running.Then a rear bumper and tare down for paint.still on the fence for what to do for a windshield top I have an extra txt top may see if i can make that work.Still have a lot of work to do

12-20-2017, 08:45 PM	#1
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65	vc 625 in a g2 got started on the g2 625 build I moved the swing arm back 2" and down 2" and am using a jakes lt lift.The set back looks ok but I think i need to raise it another inch what do you guys think.The tires are 25x1000x12.
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65

12-20-2017, 08:47 PM	#2
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65	Re: vc 625 in a g2 forgot to upload the pics
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65

12-20-2017, 11:09 PM	#4
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: vc 625 in a g2 Probably need more air in the fenders even just for after the weight of the cart rests on the springs. I would give it at least another 2". Unless you are going to do some serious trimming on the trailing edge of the fenders.

01-04-2018, 10:36 AM	#5
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: vc 625 in a g2 How's it going with the G2 conversion?

01-04-2018, 10:45 AM	#6
David Maner Morel Man Join Date: Nov 2014 Location: Northeast Oklahoma Posts: 568	Re: vc 625 in a g2 If you'll rotate the photos on your computer they'll display right on here, Just saying Oh and yes it looks good but I think you'll need more air between the tires and body so either trim or raise. Breathlessly waiting to read about the engine going in. Peace

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-04-2018, 11:12 AM	#7
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65	Re: vc 625 in a g2 I will post some pics this evening
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65

01-04-2018, 11:56 AM	#8
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: vc 625 in a g2 Great. We were afraid you got sucked into the air box of that big motor, never to be heard from again.

01-04-2018, 12:10 PM	#9
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65	Re: vc 625 in a g2 havn't even fired this one up yet been doin alot of fabbing on suspension,brakes, new drivin clutch and battery box.I actually have motor back out and working on the body so I can get the wiring done.I may get it fired up the weekend.
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65