VC 625 is in the Club Car

jackscart · 02-08-2018, 07:00 PM

pics of motor install and progress of cart

BLACK DEATH · 02-08-2018, 07:43 PM

What year is your cart?

jackscart · 02-08-2018, 08:24 PM

2004 club car ds.....thats the doubletake spartan body.
6" jakes A-arm lift

BLACK DEATH · 02-08-2018, 08:57 PM

You still running the stock 06 cw rear end?

jackscart · 02-08-2018, 09:17 PM

yes...for now.
i havnt had it out of the garage yet to really test it to see how fast it will go lol
i have only ran it forward and backwards about 15 ft

David Maner · 02-09-2018, 04:23 AM

Quote:

Originally Posted by jackscart

pics of motor install and progress of cart

Installation is looking good

Now to find a pre '97 ccw rear end you would be good to go. My old '86 ds has the same gear ratio in forward as in reverse. I was under the impression that they were lower geared in reverse but one day I had it on stands and playing with my clutches, actually watching how they were working and I noticed that my speedometer read the same in reverse as it did in forward at wot

Rooster59 · 02-09-2018, 06:29 AM

Nice job. I think that is the first 625 I have seen mounted head forward.

Good to see more of the 625's that I know are being installed.

HBR · 02-09-2018, 06:39 AM

Your new forward is about 17:1. You will be able to climb a tree but probably not go any faster than a stock cart.

If you put 8:1 gears in that rear end you will have a 12:1 forward. 6:1 gears will give you a 9:1 forward.

hookm · 02-09-2018, 07:07 AM

Quote:

Originally Posted by jackscart

pics of motor install and progress of cart

Nice Job,it looks like the clutch will hit the frame,mine only clears 1/4 of an inch.I hope it doesn't ,can't really tell from the pic.

jackscart · 02-09-2018, 07:49 PM

there is actually about an inch of clearance there.

02-08-2018, 07:43 PM	#2
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: VC 625 is in the Club Car What year is your cart?

02-08-2018, 08:24 PM	#3
jackscart Not Yet Wild Join Date: Nov 2017 Posts: 17	Re: VC 625 is in the Club Car 2004 club car ds.....thats the doubletake spartan body. 6" jakes A-arm lift
jackscart Not Yet Wild Join Date: Nov 2017 Posts: 17

02-08-2018, 08:57 PM	#4
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: VC 625 is in the Club Car You still running the stock 06 cw rear end?

02-08-2018, 09:17 PM	#5
jackscart Not Yet Wild Join Date: Nov 2017 Posts: 17	Re: VC 625 is in the Club Car yes...for now. i havnt had it out of the garage yet to really test it to see how fast it will go lol i have only ran it forward and backwards about 15 ft
jackscart Not Yet Wild Join Date: Nov 2017 Posts: 17

02-09-2018, 06:29 AM	#7
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: VC 625 is in the Club Car Nice job. I think that is the first 625 I have seen mounted head forward. Good to see more of the 625's that I know are being installed.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-09-2018, 06:39 AM	#8
HBR Gone Wild Join Date: Jun 2016 Posts: 623	Re: VC 625 is in the Club Car Your new forward is about 17:1. You will be able to climb a tree but probably not go any faster than a stock cart. If you put 8:1 gears in that rear end you will have a 12:1 forward. 6:1 gears will give you a 9:1 forward.
HBR Gone Wild Join Date: Jun 2016 Posts: 623

02-09-2018, 07:49 PM	#10
jackscart Not Yet Wild Join Date: Nov 2017 Posts: 17	Re: VC 625 is in the Club Car there is actually about an inch of clearance there.
jackscart Not Yet Wild Join Date: Nov 2017 Posts: 17