|
|||||||
| Notices |
| Big Block Talk! Everything about swapping a big block engine into your cart! |
|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Not Yet Wild
Join Date: Aug 2007
Location: Gold Canyon, AZ
Posts: 7
|
I have purchased a 1994 VX500 V-Max snowmobile motor to put in my Yamaha 1994 G9. The motor is liquid cooled and it’s a 2 stroke. The motor was in an ez-go golf cart. My question is I can’t seem to find any info on the net about this engine? I don’t know the HP rating or redline? The guy used the stock clutches off the ez-go. Can I use my stock clutches? Can I use his stock (ez-go) primary with my secondary? Should I buy the 1st and 2nd clutch off a snowmobile? Or should I get just the primary off a snowmobile? Does anyone know about this motor?
I will be doing a highly detailed (lots of photos) build up of the G9. It will have a long travel front & rear suspension and a lil bit of power to go with it. Do you think it will rip??????? |
|
|
|
|
|
|
|
|
#2 |
|
Site Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 6,020
|
I don't know about the clutches, but I can say, YES IT WILL RIP!!!!!!
|
|
Ron
If you can't run with the BIG DOGS...stay on the porch ![]() Please Visit Our Sponsors TheBadBoyG9 * Frame Mod * New Exhaust Marathon Project |
|
|
|
|
|
|
#3 |
|
Gone Wild
Join Date: Dec 2006
Posts: 964
|
You should be ok using the primary clutch that is on the engine with the G2 secondary. Go to any Yamaha dealer and buy a service manual for the sled the engine came out of. You will find all the info you need in there. Good luck! That thing is going to be fast!!
|
|
|
|