which muffler would quiet down vc625

jackscart · 05-28-2018, 11:24 AM

walker 22022 or

walker 22229

going in a 2001 club car

Shepard · 05-28-2018, 06:23 PM

Walker 22229

sillyrabbit72 · 05-29-2018, 10:17 AM

Will that work better than the stock lunchbox?

Rooster59 · 05-29-2018, 11:43 AM

Quote:

Originally Posted by sillyrabbit72

Will that work better than the stock lunchbox?

Yes! I haven't installed mine yet but I mocked it up. Had my wife run the engine while I held it on with gloves. Much quieter.

jackscart · 05-29-2018, 12:57 PM

can you post up some pictures of the install

Rooster59 · 05-29-2018, 07:46 PM

Soon as my last exhaust adapter arrives. Then it will go to the neighbor for welding.

I picked up a header fab exhaust tube from a hot rod parts supplier. It is one 1.5" dia tube that includes one 90 and a 180 bend. You can cut it up for a variety of bends. From ebay I got an exhaust adapter that is 1.25" ID in one end and 1.5" ID on the other. That will join the header to the new pipe required by the 22229 which is 1.5" inlet and outlet.

The new muffler will be in the same position as the current 22022 but the 22022 is a right angle muffler with the inlet on the side.

The 180 portion of the new pipe will exit the muffler on the left and turn to the right, ending near the right rear shackle. Much like one of the other members here with a VC460.

Rooster59 · 06-03-2018, 09:18 PM

Finished installing the exhaust today. The 625 tiger purrs like a kitten now. I took it a little further than some others did with a longer 1.5" tailpipe and 2" turn out.

The ss 6" diesel exhaust band clamp around the muffler is bolted to a steel angle frame mounted to the axle with 2-1/8" exhaust clamps.

Rooster59 · 06-06-2018, 09:39 PM

Now that I think about it, the clamps around the axle are 2-1/4" exhaust clamps.

1xxrjxx1 · 06-11-2018, 09:40 AM

I used the Walker Quiet flow ss 22266.
Works much better then the lunch box that comes with the kit.
The engine is loud now. The air intake cone releases a lot of noise.

Rooster59 · 06-19-2018, 05:48 AM

Quote:

Originally Posted by 1xxrjxx1

I used the Walker Quiet flow ss 22266.
Works much better then the lunch box that comes with the kit.
The engine is loud now. The air intake cone releases a lot of noise.

Do you have pictures of your installation? I don't know how I would have shoe horned a 15" long muffler into my cart. The 10" long 22229 was tough enough.

05-28-2018, 06:23 PM	#2
Shepard Crazy Ole Man Join Date: Jan 2016 Location: Owego NY Posts: 2,758	Re: which muffler would quiet down vc625 Walker 22229

05-29-2018, 10:17 AM	#3
sillyrabbit72 Not Yet Wild Join Date: Feb 2017 Location: Austin, TX Posts: 51	Re: which muffler would quiet down vc625 Will that work better than the stock lunchbox?

05-29-2018, 12:57 PM	#5
jackscart Not Yet Wild Join Date: Nov 2017 Posts: 17	Re: which muffler would quiet down vc625 can you post up some pictures of the install
jackscart Not Yet Wild Join Date: Nov 2017 Posts: 17

05-29-2018, 07:46 PM	#6
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: which muffler would quiet down vc625 Soon as my last exhaust adapter arrives. Then it will go to the neighbor for welding. I picked up a header fab exhaust tube from a hot rod parts supplier. It is one 1.5" dia tube that includes one 90 and a 180 bend. You can cut it up for a variety of bends. From ebay I got an exhaust adapter that is 1.25" ID in one end and 1.5" ID on the other. That will join the header to the new pipe required by the 22229 which is 1.5" inlet and outlet. The new muffler will be in the same position as the current 22022 but the 22022 is a right angle muffler with the inlet on the side. The 180 portion of the new pipe will exit the muffler on the left and turn to the right, ending near the right rear shackle. Much like one of the other members here with a VC460.

06-03-2018, 09:18 PM	#7
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: which muffler would quiet down vc625 Finished installing the exhaust today. The 625 tiger purrs like a kitten now. I took it a little further than some others did with a longer 1.5" tailpipe and 2" turn out. The ss 6" diesel exhaust band clamp around the muffler is bolted to a steel angle frame mounted to the axle with 2-1/8" exhaust clamps.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-06-2018, 09:39 PM	#8
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: which muffler would quiet down vc625 Now that I think about it, the clamps around the axle are 2-1/4" exhaust clamps.

06-11-2018, 09:40 AM	#9
1xxrjxx1 Getting Wild Join Date: Jan 2017 Location: Commerce, MI Posts: 82	Re: which muffler would quiet down vc625 I used the Walker Quiet flow ss 22266. Works much better then the lunch box that comes with the kit. The engine is loud now. The air intake cone releases a lot of noise.

Similar Threads
Thread	Forum
Beta Testing VC625 in a G2	Big Block Talk!
G2 VC625 install	Big Block Talk!
VC625 wiring help	Big Block Talk!
Need a quiet muffler for 24hp honda	Big Block Talk!
Big Block Quiet Muffler	Big Block Talk!