|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
10-22-2018, 06:46 PM | #1 |
Not Yet Wild
Join Date: Oct 2018
Posts: 10
|
Big block slow on take off
Hi everyone new to the forum and would like to say there are lots of good info on this site,after searching I was unable to find a answer to my problem. I have a 99 ezgo txt which I have just installed a new 23hp vanguard which is all stock at the moment. I ordered the install kit and clutch with new belt from Vegas Carts. The cart seems slow to take off from a dead stop engine is reving good cart just seems sluggish about getting started like a auto transmission in a car when it slips is the only way I can describe it. What do you guys think could be my problem? Could it be the driven clutch bad? All the carts I have seen on YouTube that have done this upgrade seem to take off fast when the gas is pushed but mine will not. Thanks in advance for any help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-22-2018, 07:56 PM | #2 |
Gone Wild
Join Date: Jan 2014
Location: Medina ohio
Posts: 914
|
Re: Big block slow on take off
If u can get a video of the clutches working thag will help
Your driven clutch might be to strong of a spring and the drive clutch has to over come that |
10-22-2018, 07:56 PM | #3 |
Gone Wild
Join Date: Jan 2014
Location: Medina ohio
Posts: 914
|
Re: Big block slow on take off
What clutchs are u running
|
10-22-2018, 08:23 PM | #4 |
Not Yet Wild
Join Date: Oct 2018
Posts: 10
|
Re: Big block slow on take off
7-1/4" HEAVY DUTY PRIMARY DRIVE CLUTCH (CVTECH SERIES 06) From Vegas carts and the stock driven clutch. I will make a video tomorrow evening and post it. Thanks for the help
|
10-23-2018, 04:47 PM | #5 |
Not Yet Wild
Join Date: Oct 2018
Posts: 10
|
Re: Big block slow on take off
Here’s a link to a video of my clutches.http://https://www.youtube.com/watch?v=nEyfS-RGR0o
|
10-23-2018, 04:50 PM | #6 |
Not Yet Wild
Join Date: Oct 2018
Posts: 10
|
Re: Big block slow on take off
|
10-23-2018, 04:55 PM | #7 |
Not Yet Wild
Join Date: Oct 2018
Posts: 10
|
Re: Big block slow on take off
I can’t get the link to work you may have to paste the link in you browser.
https://www.youtube.com/watch?v=nEyfS-RGR0o |
10-23-2018, 08:14 PM | #8 |
Not Yet Wild
Join Date: May 2013
Location: East Tennessee
Posts: 17
|
Re: Big block slow on take off
“Video is unavailable”
Gene |
10-29-2018, 05:44 AM | #9 |
Gone Broke
Join Date: Oct 2011
Location: Galveston, Texas
Posts: 1,592
|
Re: Big block slow on take off
There should be no hesitation, from the 23. When you go to mash the pedal, does the engine bog?
Does the motor rev well in neutral? If the motor sounds and runs okay you need to look into your drivetrain. The motor that you have is a torque master, with plenty of torque to spare!! Phttp://www.youtube.com/watch?v=WbVp9dlLiLU https://www.youtube.com/watch?v=WbVp9dlLiLU |
10-29-2018, 03:59 PM | #10 |
Not Yet Wild
Join Date: Oct 2018
Posts: 10
|
Re: Big block slow on take off
There is a slight 1 sec bog when I first go to rev it up not sure what is causing it. I plan to remove the governor and install a rev kit and tach. I am leaning to something in the clutches but I am not sure. I don't know why the video I took of the clutches will not work so I could get some info from y'all.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2005 EZGO Series Cart running slow then speeding up then slow again | Electric EZGO | |||
Overthinking? Fuse Block(s) and Grounding Block(s) | Gas Yamaha | |||
Fuse Block/ Ground Block.... what are you guys using | Electric EZGO | |||
Big block Honda super slow ! | Big Block Talk! | |||
Big Block Running Slow | Big Block Talk! |