|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
01-30-2019, 09:09 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2018
Posts: 43
|
Hit a snag on the vc 625 install
Got everything in and wired did my break in. When I went to put all the body pieces back on the valve cover on the motor has no space to allow the shifter to go back on. Motor was set to the measurement that was recommended. Any ideas?n
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-31-2019, 07:37 AM
|
#2 |
|
Gone Wild
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,955
|
Re: Hit a snag on the vc 625 install
You may have to see if you can slide the engine rearward and obtain a slightly shorter drive belt.
|
|
|
|
|
01-31-2019, 08:41 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2018
Posts: 43
|
Re: Hit a snag on the vc 625 install
Another question. My cart now with everything installed goes twice as fast in reverse than forward. Shouldn’t my club car motor be spinning clockwise?
|
|
|
|
|
01-31-2019, 09:15 PM
|
#4 |
|
Not Yet Wild
Join Date: Dec 2018
Posts: 43
|
Re: Hit a snag on the vc 625 install
Would only do 14-15 in forward and got up to 30 in reverse before I let off
|
|
|
|
|
01-31-2019, 09:17 PM
|
#5 |
|
Just Gone
 Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Hit a snag on the vc 625 install
What year's your club car?
|
|
|
|
|
01-31-2019, 09:22 PM
|
#6 |
|
Not Yet Wild
Join Date: Dec 2018
Posts: 43
|
Re: Hit a snag on the vc 625 install
2006
|
|
|
|
|
02-01-2019, 08:29 AM
|
#7 |
|
Gone Wild
Join Date: Sep 2018
Location: Michigan
Posts: 291
|
Re: Hit a snag on the vc 625 install
You didnt read the website did you?
https://vegascarts.com/collections/c...ar-ds-carryall This is highlighted in the description: "Forward will become Reverse and Reverse will become forward on 1997+ Club Cars due to a change in engine rotation. 97+ Club Cars originally came with Clockwise rotation engines but you will be replacing with a Counter Clockwise engine. This has no I’ll effect on the longevity of your cart. It will however lower your forward gear ratio from approximately 12:1 to 18:1 . The cart will have massive torque but top speed will be limited due to engine rev limit. If you need additional top speed or to lower cruising rpm, replace the rear axle gears with 6:1 or 8:1 gear sets." You could swap in a pre 1997 CCW transaxle, and that would also fix the issue. |
|
|
|
|
02-01-2019, 07:25 PM
|
#8 |
|
Not Yet Wild
Join Date: Dec 2018
Posts: 43
|
Re: Hit a snag on the vc 625 install
I ordered 6-1 gears. That way I wouldn’t need a new cradle and to find a doner rear end. If down the road I come across one for cheap I may change my mind :)
|
|
|
|
|
02-01-2019, 07:26 PM
|
#9 |
|
Not Yet Wild
Join Date: Dec 2018
Posts: 43
|
Re: Hit a snag on the vc 625 install
And I just relocated my shifter so I could still get the oil filter off
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| One post txt long travel install snag | Electric EZGO | |||
| Long Travel kit Install...Tie Rod snag!! | Electric EZGO | |||
| Mad max led install | Electric Club Car | |||
| EZGO Headlight install - new install not working | Electric EZGO | |||
| Install 6" all sport lift kit trouble install steering linkage | Lifted Golf Carts | |||
Linear Mode
