|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
02-15-2019, 01:14 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2018
Location: Missouri
Posts: 4
|
Belt issues
I’m putting a 420 predator into a 1989 club car. The issue I’m having is the factory belt is to short and I can’t find a 1 inch belt longer than the factory one. Any help would be awesome.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-16-2019, 10:46 AM
|
#2 |
|
Not Yet Wild
Join Date: Nov 2017
Location: sun city west
Posts: 27
|
Re: Belt issues
|
|
|
|
|
02-16-2019, 02:01 PM
|
#3 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Belt issues
I think CPP maybe Vegas has the long belt, last I knew there were only those two belts available for 1" wide CC.
|
|
|
|
|
02-16-2019, 05:56 PM
|
#4 |
|
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: Belt issues
Can you give us some more info on your swap? How you mounted the 420 in there? I just put a 420 in my 88 Club Car and was able to use the stock belt still using the starter/generator. I believe the stock belt is 37 1/2.
|
|
|
|
|
02-16-2019, 08:47 PM
|
#5 |
|
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Belt issues
Think it is THIS one its 42". Far as I know there are no others, its been an issue for CC swaps.
I put a clone in my G9 with the stock belt, measured and made it the same distance. The clone was higher but it worked out fine for years. One day I swapped to a 94c replacement clutch and it was tighter on the belt. I could not move the engine it was hitting the trans shifter. Finally had to pull the clone and use a longer belt for a polaris atv, drill new holes to mount engine, redo the gen. But its all good now it shifts better and works great. |
|
|
|
|
02-26-2019, 07:09 AM
|
#6 |
|
Gone Wild
Join Date: Dec 2010
Location: Southern Ontario
Posts: 533
|
Re: Belt issues
This is the longest belt I could find at the time (about 8 years ago) that would work for me. It's right around 42". I'll get a better pic today showing all the info stamped on the belt.
 |
|
|
|
|
02-26-2019, 07:10 AM
|
#7 |
|
Gone Wild
Join Date: Dec 2010
Location: Southern Ontario
Posts: 533
|
Re: Belt issues
Forgot to mention the engine is mounted as far fwd as possible to clear the transaxle governor, hence the need for a longer than usual belt.
|
|
|
|
|
02-26-2019, 12:14 PM
|
#8 |
|
Gone Wild
Join Date: Dec 2010
Location: Southern Ontario
Posts: 533
|
Re: Belt issues
Here ya go. I think I got it from Carts Plus. Not 100% sure though.
 |
|
|
|
|
02-26-2019, 03:41 PM
|
#9 |
|
Gone Wild
Join Date: Dec 2010
Location: Southern Ontario
Posts: 533
|
Re: Belt issues
What width belt do you need?
|
|
|
|
|
02-26-2019, 03:41 PM
|
#10 |
|
Gone Wild
Join Date: Dec 2010
Location: Southern Ontario
Posts: 533
|
Re: Belt issues
Never mind. I'm an idiot. I missed the belt width in your first post.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Belt issues | Gas Harley Davidson | |||
| Belt and Clutch Issues | Gas Yamaha | |||
| New belt issues | Gas EZGO | |||
| 1998 TXT Belt Issues? | Gas EZGO | |||
| Belt/Clutch Issues | Big Block Talk! | |||
Linear Mode
