|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
04-16-2009, 10:13 PM | #1 |
EZ-GO-N
Join Date: Dec 2007
Location: Geneseo, IL
Posts: 505
|
23hp Vanguard Install ????
Hey guys I am putting in my vany, I have a few questions, I am using a performance v twin billet K & N, I noticed there is no hole in the intake for the breather hose, What do u suggest I do with that, put a hole in the billet, and then run a hose to it, or just put a little filter right of the valve cover, and then one other thing, choke hook up, does any one have any photos of how they hooked up a choke cable bracket, etc. thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-19-2009, 08:35 PM | #2 |
Gone Wild
Join Date: Aug 2008
Posts: 178
|
Re: 23hp Vanguard Install ????
You may want to connect the breather to the intake hose, here's why - When the engine is running, it creates a positive pressure inside of the crank case. This leads to poor ring seat and can gun up the ring lands. Another reason is - when you create a negative pressure inside the crank case, you gain HP, the rings seal along with less stress on you valve seals and engine gaskets. Some of you fellow GM gear heads may be familiar with a positive crank case pressure issue with the 3.8L Turbo engine found in the Grand Nationals and Turbo Coups, with their leaking oil pans (URGH!!!)...
|
04-20-2009, 09:35 PM | #3 |
EZ-GO-N
Join Date: Dec 2007
Location: Geneseo, IL
Posts: 505
|
Re: 23hp Vanguard Install ????
Well it doenst have a intake hose, it has a billet block with a k & N filter on it, so I need to get a hole machined into the intake adapter, and run a hose from the valve cover to there,
|
04-20-2009, 09:40 PM | #4 |
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: 23hp Vanguard Install ????
are you boys ready to drop that big guy in yet.
|
04-20-2009, 09:41 PM | #5 |
Gone Wild
Join Date: Aug 2008
Posts: 178
|
Re: 23hp Vanguard Install ????
Piece of cake! All you need to do is drill a hole large enough for a 1/4" pipe tap and tap the hole. Go down to you local Home Cheapo and grab a barbed fitting and an appropriate size hose. Install the fitting and hose, then your done!
I would recomend putting some pipe dope on the threads to enhance a tight seal and to keep the dirt out. |
04-20-2009, 10:06 PM | #6 |
FLIPPER
Join Date: Jun 2008
Location: Gainesville, FL
Posts: 429
|
Re: 23hp Vanguard Install ????
Don't need choke cable - Just pump the throttle a couple of times and it will build a fire.
Don't get any colder in CA than here in FL does it? |
04-20-2009, 10:15 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 23hp Vanguard Install ????
That's an interesting thought.... But I have to use the choke on my stock workhorse all the dang time. Is the V-twin gonna act differently?
|
04-20-2009, 10:19 PM | #8 |
NOT a Sponsor
Join Date: Jan 2009
Location: So CAL
Posts: 2,147
|
Re: 23hp Vanguard Install ????
we have never used a joke either
|
04-20-2009, 10:28 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 23hp Vanguard Install ????
But you are Coastal ...... When it is 20-30 degrees here in the Temecula Valley I don't think she will start ....
|
04-20-2009, 10:30 PM | #10 |
Gone Wild
Join Date: Feb 2009
Location: P-COLA
Posts: 1,176
|
Re: 23hp Vanguard Install ????
|
|
|
Similar Threads | ||||
Thread | Forum | |||
How fast will my 23hp Vanguard Ezgo Go | Big Block Talk! | |||
Oil Change Vangaurd 23HP | Big Block Talk! | |||
23hp Vanguard carb fuel shut off solenoid sticking | Big Block Talk! | |||
Briggs 23HP redline with Rev kit/Hi Per Cam | Big Block Talk! | |||
Forum Newbie - 18HP Vanguard Install | Big Block Talk! |