|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
01-06-2020, 03:21 PM | #1 |
Not Yet Wild
Join Date: Jan 2020
Posts: 5
|
clutch questions
hey guys im new to this and have been searching your forums for info but havint found exactly what im looking for, I have a bristers chuck wagon that uses the comet 500 series cvt set up , I have a good low hour 23hp Kawasaki engine to swap in to it with a 1 1/8 shaft , im wondering what drive clutch I will need that will work ok with my comet 500 driven clutch , and belt , any info would b greatly appreciated thanks !
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-07-2020, 08:42 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: clutch questions
Any primary clutch with a 1 1/8" hub will bolt up, just make sure the engagement is set up for 1600-1800 rpm or so. The faster the engine spins at engagement, the more torque the engine will have to get it going, however, the "feel" will be not as smooth. A 1400-1500 rpm engagement will feel more smooth but have less power. I'm assuming the Kaw engine is a Vtwin? If so, they have a high torque rating at low rpm so lower engagement will have plenty of power.
Call Cart Parts Plus, they are a sponsor, they should have a clutch for that. |
01-07-2020, 10:09 AM | #3 |
Not Yet Wild
Join Date: Jan 2020
Posts: 5
|
Re: clutch questions
it is a vtwin I appreciate the info ill give them a call !
|
01-07-2020, 11:45 PM | #4 |
Gone Wild
Join Date: Nov 2011
Posts: 197
|
Re: clutch questions
Cvtech powerbloc has that shaft
|
|
|
Similar Threads | ||||
Thread | Forum | |||
clutch questions on my g1 | Gas Yamaha | |||
g2 clutch questions | Gas Yamaha | |||
Clutch questions | Gas EZGO | |||
Clutch questions again | Big Block Talk! | |||
Clutch Questions | Gas Yamaha |