Engine Swap

RALVES · 04-30-2009, 10:18 AM

yeah that is what i thought. I have a 1990 Marathon 2 stroke. So i would need to put in a different rear end it looks like.
Thanks
Rich

dirtracer27x · 05-02-2009, 10:38 AM

i have my old engine and cradle in the garage,i can measure it if needed.

billys buggie · 05-05-2009, 10:39 AM

If You Could That Would Be Very Helpful. I Think That It Is The Same and My Wheel Base Is Longe Or My Seat IS Closer To The Front. Thanks Bill

billys buggie · 05-06-2009, 02:06 PM

Has Anyone Use The Stock Muffler? Is It A Quiet As It Would Be With The Stock Engine? In The Camp Ground I Am In They Do Not Alow Any New Gas Cart Only The Ones That Have Been There So I Have To Keep It Quiet. Thanks For Everones Help Again. Bill

Nubs · 05-06-2009, 07:11 PM

Quote:

Originally Posted by billys buggie

Has Anyone Use The Stock Muffler? Is It A Quiet As It Would Be With The Stock Engine? In The Camp Ground I Am In They Do Not Alow Any New Gas Cart Only The Ones That Have Been There So I Have To Keep It Quiet. Thanks For Everones Help Again. Bill

i used the stock 4 cycle muffler on a 16hp and it works great and is as quiet as stock.

smallblock450sl · 05-06-2009, 07:31 PM

Quote:

Originally Posted by pizzamaker

i used the stock 4 cycle muffler on a 16hp and it works great and is as quiet as stock.

Nice, PM! Just what the guy asked for! Clean looking install. Thanks for the Pic's.

billys buggie · 05-07-2009, 07:24 AM

thank pizzamaker that helps alot thank agian for all your help.

Nubs · 05-07-2009, 08:00 AM

Quote:

Originally Posted by billys buggie

thank pizzamaker that helps alot thank agian for all your help.

.. when are you going to start your engine swap

scottyb · 05-07-2009, 08:00 AM

If you can't post pics simply post the wheel base, measure hub to hub.

billys buggie · 05-07-2009, 08:28 AM

i think i am going to start this weekend i will post pitcures if possable and the wheel base mesurment. it will a little shorter gecause of the lift. i think i am at 6 inches of lift. thanks bill

04-30-2009, 10:18 AM	#11
RALVES Not Yet Wild Join Date: Apr 2009 Posts: 16	Re: Engine Swap yeah that is what i thought. I have a 1990 Marathon 2 stroke. So i would need to put in a different rear end it looks like. Thanks Rich
RALVES Not Yet Wild Join Date: Apr 2009 Posts: 16

05-02-2009, 10:38 AM	#12
dirtracer27x Gone Wild Join Date: Aug 2008 Location: fairfield ca Posts: 236	Re: Engine Swap i have my old engine and cradle in the garage,i can measure it if needed.

05-05-2009, 10:39 AM	#13
billys buggie Not Yet Wild Join Date: Apr 2008 Location: pittsburgh Posts: 62	Re: Engine Swap If You Could That Would Be Very Helpful. I Think That It Is The Same and My Wheel Base Is Longe Or My Seat IS Closer To The Front. Thanks Bill

05-07-2009, 07:24 AM	#17
billys buggie Not Yet Wild Join Date: Apr 2008 Location: pittsburgh Posts: 62	Re: Engine Swap thank pizzamaker that helps alot thank agian for all your help.

05-07-2009, 08:00 AM	#19
scottyb golf cart enthusiast Join Date: Dec 2007 Location: So Cal Posts: 21,877	Re: Engine Swap If you can't post pics simply post the wheel base, measure hub to hub.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-07-2009, 08:28 AM	#20
billys buggie Not Yet Wild Join Date: Apr 2008 Location: pittsburgh Posts: 62	Re: Engine Swap i think i am going to start this weekend i will post pitcures if possable and the wheel base mesurment. it will a little shorter gecause of the lift. i think i am at 6 inches of lift. thanks bill

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
engine swap	Gas EZGO
Engine Swap!!!	Gas Club Car
Engine Swap from 295 cc to ??????	Gas EZGO
engine swap	Gas Yamaha
engine swap	Gas EZGO