Engine Swap

billys buggie · 05-07-2009, 08:31 AM

i do have to find out my shaft size the engine is in a cub cadet 2060 tractor that i got for $30.00 and have not taken it apart yet.

billys buggie · 05-11-2009, 06:52 PM

the wheel base is 72 inches and some more pictures

billys buggie · 05-12-2009, 08:13 AM

got started

Nubs · 05-12-2009, 08:17 AM

cool

looks like your off to a great start.

billys buggie · 05-12-2009, 08:22 AM

i seen where everone has taken the lincage of the rearend do that do anything in the rear end? do i have to take it out of the rearend? thanks bill

Nubs · 05-12-2009, 08:41 AM

everybody has a view on this, many carts out there are running with the gov unhooked in the axle with no problems. i leave them in unless your going to be running high rpms, but if there comes a time that you want to do a gear change or any reason that you need to get in the case then pull it for sure. no reason to have parts flying around if your not needing them.
it comes down to if you don't mind doing the work? then pull it out. its not hard to do, there is a thread some were here that explains how to do it.

thats my two cents

billys buggie · 05-12-2009, 08:51 AM

if i use it then i need to remove the one on the engine write. thank for all your help bill

Nubs · 05-12-2009, 08:56 AM

no, that would take some work to try to use the gov on the axle! just run your cable right to the engine.

Nubs · 05-12-2009, 08:59 AM

this shows the stock marathon throttle cable hooked right to the engine

mikeshotrodshop · 05-13-2009, 06:50 AM

Maybe this will help with some ideas?

New BIG BLOCK kid in town! (pics)

And

Catapillar cart (pics)

05-07-2009, 08:31 AM	#21
billys buggie Not Yet Wild Join Date: Apr 2008 Location: pittsburgh Posts: 62	Re: Engine Swap i do have to find out my shaft size the engine is in a cub cadet 2060 tractor that i got for $30.00 and have not taken it apart yet.

05-12-2009, 08:17 AM	#24
Nubs Gone Wild Join Date: Jun 2008 Location: waldo,wisconsin Posts: 5,406	Re: Engine Swap cool looks like your off to a great start.

05-12-2009, 08:22 AM	#25
billys buggie Not Yet Wild Join Date: Apr 2008 Location: pittsburgh Posts: 62	Re: Engine Swap i seen where everone has taken the lincage of the rearend do that do anything in the rear end? do i have to take it out of the rearend? thanks bill

05-12-2009, 08:41 AM	#26
Nubs Gone Wild Join Date: Jun 2008 Location: waldo,wisconsin Posts: 5,406	Re: Engine Swap everybody has a view on this, many carts out there are running with the gov unhooked in the axle with no problems. i leave them in unless your going to be running high rpms, but if there comes a time that you want to do a gear change or any reason that you need to get in the case then pull it for sure. no reason to have parts flying around if your not needing them. it comes down to if you don't mind doing the work? then pull it out. its not hard to do, there is a thread some were here that explains how to do it. thats my two cents

05-12-2009, 08:51 AM	#27
billys buggie Not Yet Wild Join Date: Apr 2008 Location: pittsburgh Posts: 62	Re: Engine Swap if i use it then i need to remove the one on the engine write. thank for all your help bill

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-12-2009, 08:56 AM	#28
Nubs Gone Wild Join Date: Jun 2008 Location: waldo,wisconsin Posts: 5,406	Re: Engine Swap no, that would take some work to try to use the gov on the axle! just run your cable right to the engine.

05-12-2009, 08:59 AM	#29
Nubs Gone Wild Join Date: Jun 2008 Location: waldo,wisconsin Posts: 5,406	Re: Engine Swap this shows the stock marathon throttle cable hooked right to the engine

05-13-2009, 06:50 AM	#30
mikeshotrodshop Gone Wild Join Date: Aug 2008 Posts: 174	Re: Engine Swap Maybe this will help with some ideas? New BIG BLOCK kid in town! (pics) And Catapillar cart (pics)
mikeshotrodshop Gone Wild Join Date: Aug 2008 Posts: 174

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
engine swap	Gas EZGO
Engine Swap!!!	Gas Club Car
Engine Swap from 295 cc to ??????	Gas EZGO
engine swap	Gas Yamaha
engine swap	Gas EZGO