|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
11-02-2009, 11:30 AM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2008
Location: Ft. Collins, Colorado
Posts: 19
|
Club Car Rear End Swap
Does anyone know of any other manufacturer that has a driver side pulley system that has a width about the same as a club car rearend?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-03-2009, 12:58 PM
|
#2 |
|
Not Yet Wild
Join Date: Oct 2009
Location: Malvern, Ohio
Posts: 58
|
Re: Club Car Rear End Swap
Not sure what you are trying to accomplish but if you have a club car and want the driven shaft on the left side you can just flip the rear end around. I did it on mine and it works fine. You will probably want a set of high speed gears though as I have been told reverse is a lower ratio.
|
|
|
|
|
11-03-2009, 01:20 PM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2008
Location: Ft. Collins, Colorado
Posts: 19
|
Re: Club Car Rear End Swap
I am putting a snow mobile motor in it, not real crazy but guessing about 60 to 70 hp. I have stretched the cart into a four seater and lifted, why did you flip the rear end, what are you running. Do you have any idea how much high speed gears are? Have you tried this or just heard about it? Thanks for replying.
|
|
|
|
|
11-03-2009, 01:25 PM
|
#4 |
|
Not Yet Wild
Join Date: Oct 2009
Location: Malvern, Ohio
Posts: 58
|
Re: Club Car Rear End Swap
I flipped the rear end in my club car and put a Ninja 500 engine in it. I had to put high speed gears in it but now top out at about 65. Check the site sponsers for gears. I think gears are about $200.
|
|
|
|
|
11-03-2009, 01:31 PM
|
#5 |
|
Not Yet Wild
Join Date: Nov 2008
Location: Ft. Collins, Colorado
Posts: 19
|
Re: Club Car Rear End Swap
Nice--Do you have any pics, like to see how you did that. How long have you been running this thing. Building this for my wife so reliability is a must, if you know what I mean.
|
|
|
|
|
11-03-2009, 01:35 PM
|
#6 |
|
Not Yet Wild
Join Date: Oct 2009
Location: Malvern, Ohio
Posts: 58
|
Re: Club Car Rear End Swap
Going to try and take pictures tonight. I have put probably 200 miles on it. HARD miles. Lifts the tires 1st through 3rd. Its even been rolled during a donut, lol.
|
|
|
|
|
11-03-2009, 02:19 PM
|
#7 |
|
Not Yet Wild
Join Date: Nov 2008
Location: Ft. Collins, Colorado
Posts: 19
|
Re: Club Car Rear End Swap
Nice--So the gears aren't directionally cut, huh. I am going to investigate this some more. Sure would make my life a lot easier. Do you know of anyone else that has done this?
|
|
|
|
|
11-03-2009, 02:22 PM
|
#8 |
|
Not Yet Wild
Join Date: Oct 2009
Location: Malvern, Ohio
Posts: 58
|
Re: Club Car Rear End Swap
Yes gears are directional. You are flipping the rear end not installing the gears backwards.
|
|
|
|
|
11-03-2009, 07:17 PM
|
#9 |
|
Gone Broke
Join Date: Jul 2008
Location: Central Illinois
Posts: 758
|
Re: Club Car Rear End Swap
I had 6:1 gears in my carryall. I think they were about 250.00.
|
|
|
|
|
11-04-2009, 12:17 PM
|
#10 |
|
Not Yet Wild
Join Date: Oct 2009
Location: Malvern, Ohio
Posts: 58
|
Re: Club Car Rear End Swap
Here is a couple pictures. Dirty and crude, never did a final tear down.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 99 club car rear end | Big Block Talk! | |||
| club car honda clone swap | Big Block Talk! | |||
| 92 Gas club car motor swap! | Gas Club Car | |||
| 21hp Kawasaki Club Car Swap | Big Block Talk! | |||
| 13hp Club Car Swap | Big Block Talk! | |||
Linear Mode
