|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
12-26-2007, 12:38 PM | #1 |
Not Yet Wild
Join Date: Dec 2007
Posts: 2
|
HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
I noticed the directional rotation of the Kohler Im using is clockwise while standing looking at the shaft side. I then noticed that If I put this motor in my ez go that the motor will be turning the wrong way.
How are you guys doing this by putting these Big Blocks in. Please let me know soon, I seen this and decided to sell my kohler twin and theres a guy claims hes coming to buy it this weekend. So I need help before I possibly sell this motor. I dont want to sell it if I will be able to use it in my cart.. THanks Woodro350@gmail.com |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-26-2007, 02:20 PM | #2 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
What did the Kohler come out of? Most (just a fraction from all) small engines turn clockwise looking at the flywheel (counterclockwise looking at the crank).
My best suggestion is to sell that and use the money on a Big Block kit from Cart Parts Plus. Their link is in my signature. |
12-26-2007, 11:31 PM | #3 |
Not Yet Wild
Join Date: Dec 2007
Posts: 2
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
Ok, I double checked it and it rotates in the right direction.
Have some questions to anyone. Do I need to get a special mounting plate or just make the one that the motor is fastend to work? Where do I get a clutch for a 1-1/8" shaft? And this is a Twin opposed engine instead of a V-twin, Will there be clearence issues? Thanks for the help. |
12-27-2007, 07:21 AM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
12-28-2007, 07:27 AM | #5 | |
Gone Wild
Join Date: Jan 2007
Posts: 207
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
Quote:
|
|
01-02-2008, 10:21 AM | #6 |
TOD WILD
Join Date: Nov 2007
Location: YUMA AZ
Posts: 666
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
|
01-02-2008, 08:47 PM | #7 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
Quote:
|
|
01-02-2008, 08:56 PM | #8 | |
TOD WILD
Join Date: Nov 2007
Location: YUMA AZ
Posts: 666
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
Quote:
system so the stock starter/generator was retained and it works real well with the stock 18hp vanny and starts just like a stocky..so the pull start is a back up..!! |
|
01-21-2008, 05:18 PM | #9 |
Not Yet Wild
Join Date: Jan 2008
Location: Yuma AZ
Posts: 3
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
nice... How did you attach the stock drive clutch to the vanny's shaft?
|
01-21-2008, 09:45 PM | #10 |
TOD WILD
Join Date: Nov 2007
Location: YUMA AZ
Posts: 666
|
Re: HELP!!!! Im Wanting to Install a BIG BLOCK IN MY EZ GO
Here is a pic of the tapered adapter that we use to mate up the stock
clutch to the vannys... crank002 (1).jpg I'm fixing this engine because this guy didn't want to buy the rev kit!!! |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Vangaurd Install | Big Block Talk! | |||
speed spring install, need help | Gas Yamaha | |||
help with tire n wheel install.... | Design Center | |||
fuel guage install on G9 | Gas Yamaha | |||
Power Kit install | Lifted Golf Carts |