in need of belt

nail driver · 03-30-2010, 06:56 PM

anybody out there thats put a 16hp clone in a pre 96cc tell me where to find a belt?

DOOmsman · 03-30-2010, 07:58 PM

What clutches what is your center to center?

nail driver · 03-30-2010, 08:33 PM

nice bunny,stock. about 9". stock seems to be my problem 15/16 wide,seems like 1 3/16" is easery to find.took the old belt cut it added the diff came up with 40". i have room to move the motor forward so longer could work but wider will cause belt drag.thanks for your help DOOmsman

ruredy · 03-31-2010, 07:09 AM

Ok, so what happen to.......

Quote:

Originally Posted by nail driver

Thanks ruredy but I have allready order a belt from vbelts.they had a 7/8x40 but when I called them they said that was to the core threads what ever that ment. He said out side total is40.4,I have room to slide the clone forward if I need to.

nail driver · 03-31-2010, 02:44 PM

sent it back. variable speed belt to thin,but the length was right.to day i revisited where the motor was position.relocated part the starter,cut a couple mounting ears off slid the motor back within 3/6" of the rearend and the stock belt fits. i didnt say works.test run tomorrow. thanks for everyone help.

BLACK DEATH · 04-02-2010, 01:51 PM

any more info on this?

cuzky · 04-02-2010, 05:41 PM

Have you tryied to call Tom at CPP ? He can come up with a belt for you .

03-30-2010, 06:56 PM	#1
nail driver Not Yet Wild Join Date: Mar 2010 Location: georgetown ky Posts: 39	in need of belt anybody out there thats put a 16hp clone in a pre 96cc tell me where to find a belt?

03-30-2010, 07:58 PM	#2
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,220	Re: in need of belt What clutches what is your center to center?

03-30-2010, 08:33 PM	#3
nail driver Not Yet Wild Join Date: Mar 2010 Location: georgetown ky Posts: 39	Re: in need of belt nice bunny,stock. about 9". stock seems to be my problem 15/16 wide,seems like 1 3/16" is easery to find.took the old belt cut it added the diff came up with 40". i have room to move the motor forward so longer could work but wider will cause belt drag.thanks for your help DOOmsman

03-31-2010, 02:44 PM	#5
nail driver Not Yet Wild Join Date: Mar 2010 Location: georgetown ky Posts: 39	Re: in need of belt sent it back. variable speed belt to thin,but the length was right.to day i revisited where the motor was position.relocated part the starter,cut a couple mounting ears off slid the motor back within 3/6" of the rearend and the stock belt fits. i didnt say works.test run tomorrow. thanks for everyone help.

04-02-2010, 01:51 PM	#6
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: in need of belt any more info on this?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-02-2010, 05:41 PM	#7
cuzky Gone Wild Join Date: Jul 2008 Location: Crystal River,Fl. Posts: 544	Re: in need of belt Have you tryied to call Tom at CPP ? He can come up with a belt for you .

Similar Threads
Thread	Forum
92 carry all drive belt and starter belt	Gas Club Car
How do I change the drive belt and altenator belt?	Gas Club Car
'92 carryall with new engine, belt slips even with new belt and motor set far forward	Gas Club Car
belt # for 07 ST	Gas EZGO
belt help?	Gas Yamaha