|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
01-29-2008, 12:11 AM | #1 |
Frog Hunter
Join Date: Dec 2006
Location: Little Rock, Ar
Posts: 1,161
|
No No Vangaurd Virus
Im affraid its spreading. But I think I caught it in time. I just did a full tune up on the Briggs. Oil,air,fuel filters and change of oil, plugs , gas treatment etc etc. However, my motor isn't running quite to speed. When you really get on it, even in neutral, it will bog down for a second before it revs up. And thats going from idle to WOT. It may be my valves. If so, how would i go about adjusting them? Please explain this process if you can! Thanks, -Austin
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-29-2008, 06:59 AM | #2 |
Gone Wild
Join Date: Jan 2007
Posts: 207
|
Re: No No Vangaurd Virus
Sounds like a carb adjustment to me.
|
01-29-2008, 08:26 AM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: No No Vangaurd Virus
Yep...I agree.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-29-2008, 11:40 AM | #4 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: No No Vangaurd Virus
Speaking of no no, haven't seen him post in a week or so, who's he mad at this time? i wonder if he ever got his cart going
|
01-29-2008, 12:04 PM | #5 |
Gone Wild
Join Date: Aug 2007
Location: near sacramento,ca
Posts: 1,895
|
Re: No No Vangaurd Virus
sounds like carb to me also.
however just in case to adjust valves remove 2 bolts on top of valve covers move crank to top dead center make sure the valve you are measuring is not on the compression stroke measure gap between valve rocker and valve I think intake is .006 and exhaust is .008 to adjust use a 12mm? box end wrench to unloosen the lock nut. adjust clearance by using a 5mm? Allen wrench to open or close the clearance to the spec torque down lock nut while holding the Allen wrench. check clearance again to make sure it did not move move to next valve and repeat silicone gasket and put valve cover back on. Go to other side of the motor and repeat. |
01-29-2008, 01:37 PM | #6 |
Super Moderator
Join Date: Mar 2007
Location: Pluto
Posts: 20,472
|
Re: No No Vangaurd Virus
|
01-29-2008, 03:15 PM | #7 |
Gone Wild
Join Date: Jan 2007
Posts: 731
|
Re: No No Vangaurd Virus
I think its been nearly a month.
|
01-29-2008, 05:35 PM | #8 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Re: No No Vangaurd Virus
I think NONO said his herpes was acting up again.
Just messin wid ya NONO. Last edited by roady89; 06-14-2008 at 05:21 PM.. Reason: We miss HOMO |
01-29-2008, 07:10 PM | #9 |
Gone Wild
Join Date: Nov 2007
Location: Apple Valley, Ca
Posts: 374
|
Re: No No Vangaurd Virus
Maybe he bought an EZGO and he's afraid to let any one know!
|
01-29-2008, 07:16 PM | #10 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: No No Vangaurd Virus
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Vangaurd Install | Big Block Talk! | |||
Briggs & Stratton V-Twin Vangaurd - Phx | Golf Carts and Parts | |||
Vangaurd cam help? | Big Block Talk! | |||
18 hp Vangaurd engine | Big Block Talk! |