Throttle Linkage

chazdo2 · 03-26-2011, 06:25 PM

Anybody have any pics of Vanguard throttle and choke setup? Can I leave the governor on or should I. I fired it up and boy it sounds like a stock car. Gonna have to put some muffler on it. I am not sure where to put what cable and how they should be run.

cowboyoutlaw76 · 03-29-2011, 04:33 PM

Hey Chaz I believe you have the same setup as i do. On my engine if im standing on the clutch side looking at the engine theres a cable clamp on the right side back by the carb I hooked my choke cable up there. Stock location. on the left side by the govener theres another cable clamp. I rerouted my throttle cable to the front and hooked it in there. Theres a hole in the throttle linkage that goes over to the carb i drilled a bigger hole in the linkage and hooked my stock cable in there. real easy to do. Ill try to get some pics up before i install my new carb setup. With my new setup i will be diconnecting the govener. its not real fast with the govener but has tons of torque.

chazdo2 · 03-29-2011, 06:17 PM

Thanks a ton! Its kinda clear but I would love a couple of pics!!

cowboyoutlaw76 · 03-30-2011, 07:31 PM

Sorry chaz been busy at work and working on my John Deere ill try to get them up tomarrow for ya

cowboyoutlaw76 · 04-03-2011, 05:51 PM

Hey chaz dont know if you need it anymore but i finally got a chance to work on mine heres that pic i owe you

chazdo2 · 04-05-2011, 06:24 AM

PERFECT! Thanks a lot.

chazdo2 · 04-08-2011, 05:58 AM

What is operating the choke, its a little sketchy to me.

03-26-2011, 06:25 PM	#1
chazdo2 Gone Wild Join Date: Oct 2010 Location: Central New York Posts: 812	Throttle Linkage Anybody have any pics of Vanguard throttle and choke setup? Can I leave the governor on or should I. I fired it up and boy it sounds like a stock car. Gonna have to put some muffler on it. I am not sure where to put what cable and how they should be run.

03-29-2011, 04:33 PM	#2
cowboyoutlaw76 Not Yet Wild Join Date: May 2010 Location: Mertztown, Pa Posts: 70	Re: Throttle Linkage Hey Chaz I believe you have the same setup as i do. On my engine if im standing on the clutch side looking at the engine theres a cable clamp on the right side back by the carb I hooked my choke cable up there. Stock location. on the left side by the govener theres another cable clamp. I rerouted my throttle cable to the front and hooked it in there. Theres a hole in the throttle linkage that goes over to the carb i drilled a bigger hole in the linkage and hooked my stock cable in there. real easy to do. Ill try to get some pics up before i install my new carb setup. With my new setup i will be diconnecting the govener. its not real fast with the govener but has tons of torque.

03-29-2011, 06:17 PM	#3
chazdo2 Gone Wild Join Date: Oct 2010 Location: Central New York Posts: 812	Re: Throttle Linkage Thanks a ton! Its kinda clear but I would love a couple of pics!!

03-30-2011, 07:31 PM	#4
cowboyoutlaw76 Not Yet Wild Join Date: May 2010 Location: Mertztown, Pa Posts: 70	Re: Throttle Linkage Sorry chaz been busy at work and working on my John Deere ill try to get them up tomarrow for ya

04-05-2011, 06:24 AM	#6
chazdo2 Gone Wild Join Date: Oct 2010 Location: Central New York Posts: 812	Re: Throttle Linkage PERFECT! Thanks a lot.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-08-2011, 05:58 AM	#7
chazdo2 Gone Wild Join Date: Oct 2010 Location: Central New York Posts: 812	Re: Throttle Linkage What is operating the choke, its a little sketchy to me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Throttle Linkage Pictures?	Gas Club Car
Throttle linkage	Gas EZGO
throttle linkage	Gas Columbia ParCar
01 Workhorse throttle linkage	Gas EZGO
Throttle Linkage	Big Block Talk!