|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
02-16-2007, 03:28 PM | #1 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Engine Keyway?
Was my engine suppose to come with a key in the shaft? I dont have a key on the shaft and no key came with the clutch so it just spins around on the shaft. Is this something I have to make?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-16-2007, 03:31 PM | #2 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
I would think it should've came with one. Call them and see. If not, you should be able to pick one up.
|
|
|
02-16-2007, 03:33 PM | #3 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
My last one came with it, I'll go check the new one and get back to you.
|
02-16-2007, 03:49 PM | #4 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
I thought it was should have come with one. I saw a long piece of solid square tubing at Tractor Supply. If its the right thichness can I cut that to fit?
|
02-16-2007, 04:11 PM | #5 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Hardware store should have key stock. They should even have them in
different lengths. they should also have woodruff keys (the half moon). |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-16-2007, 06:00 PM | #6 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Thanks do I need a 1/4" woodruff key if the shaft has a 1/4" keyway?
|
02-16-2007, 06:16 PM | #7 | |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Quote:
STRAIGHT KEY WOODRUFF KEY |
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
||
02-16-2007, 10:45 PM | #8 | |
Gone Wild
Join Date: Feb 2007
Posts: 229
|
Quote:
|
|
02-17-2007, 06:30 PM | #9 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
I found one at Tractor Supply. Thanks for the help
|