|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
12-02-2011, 10:20 AM | #1 |
Not Yet Wild
Join Date: Dec 2011
Posts: 24
|
Ez-go shuttle with samurai axels need info
I have a ez-go shuttle i want to install a yammaha 300 motor and samurai axels the problem is the motor dont have reverse so i was thinkin about using a golf cart rear end with reverse as the t-case but will it have to much gear? Any input welcome......
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2011, 10:24 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Ez-go shuttle with samurai axels need info
A shuttle is a big cart and a 300 (4 stroke) is a small motor.
|
12-05-2011, 02:39 PM | #3 |
Not Yet Wild
Join Date: Dec 2011
Posts: 24
|
Re: Ez-go shuttle with samurai axels need info
This is very true i have a friend that has one that he streched to make a eight seater out of it has a 300 motor samurai t-case n toyota axels all stock with a 42 inch tractor tire n it pulls it good tops out about 20 mph so thats what i was based on my build..
|
12-05-2011, 04:17 PM | #4 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Ez-go shuttle with samurai axels need info
That sounds like a project I would like to watch.
Can you get some pics of your buddies cart posted? |
12-06-2011, 08:19 AM | #5 |
Not Yet Wild
Join Date: Dec 2011
Posts: 24
|
Re: Ez-go shuttle with samurai axels need info
Ya i will try n get some of his n mine the next day or so he is in the middle of redoing the suspenison now and im starting mine i cleared all the stuff i want need off mine last night so i will post pics soon looks like its goin to be around 50 inches height at the floor boards....
|
12-06-2011, 10:09 PM | #6 |
Gone Wild
Join Date: Jan 2010
Location: Disfuction Junction AZ
Posts: 174
|
Re: Ez-go shuttle with samurai axels need info
thats awesome!
I just picked up a Samurai a couple months ago and its a blast to drive around even with that 1.3L ... It goes just about everywhere and its pretty stock with open diffs and small tires I would opt for a bigger motor on this build |
12-07-2011, 08:35 AM | #7 |
Not Yet Wild
Join Date: Dec 2011
Posts: 24
|
Re: Ez-go shuttle with samurai axels need info
WELL I HAVE THE 300 AND IM GOIN TO MAKE THE MOTOR MOUNTS BOLT IN SO THAT WHEN I RUN ACROSS A LARGER MOTOR I CAN REMOVE N REINSTALL THE NEW MOTOR WITH LIL REWORK...
|
12-07-2011, 08:18 PM | #8 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Ez-go shuttle with samurai axels need info
OK ok ok, Use the 300, just don't hollar at us anymore!!
Some of us start drinking in the morning, Geeez........ |
12-08-2011, 09:52 AM | #9 |
Not Yet Wild
Join Date: Dec 2011
Posts: 24
|
Re: Ez-go shuttle with samurai axels need info
Geeez..... Here we go need some in put what do yall think....
Top or no top blue or silver |
12-08-2011, 10:57 PM | #10 |
rifter
Join Date: Nov 2007
Location: Orlando Florida
Posts: 4,055
|
Re: Ez-go shuttle with samurai axels need info
I think we need some pictures!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Help! I can't get the axels out of old cushman rear end | Gas golf carts | |||
WTB G1 axels NEED BAD !!!! | Gas Yamaha | |||
Yamaha G1 axels | Golf Carts and Parts | |||
axels | Design Center | |||
my new shuttle | Electric EZGO |