16 Hp Chinese motor help

kyle14x7 · 07-03-2008, 02:31 PM

One more thing I read in one of your older post that the 780 does not come with a bolt and it requiered a 7/16 fine thread bolt any idea on how long the bolt is, or is it a ganaric length? Thanks alot!

Yamaha4life · 07-03-2008, 04:16 PM

Quote:

Originally Posted by kyle14x7

One more thing I read in one of your older post that the 780 does not come with a bolt and it requiered a 7/16 fine thread bolt any idea on how long the bolt is, or is it a ganaric length? Thanks alot!

Yeah any length should work as long as theres enough thread there to get it up in there tight. I would reccomend going by your hardware store and getting a few different lenghts and see which one works best.

kyle14x7 · 07-03-2008, 07:05 PM

I'm trying to post my pics but I keep geting an invalide file error under attachments when I try to upload

Yamaha4life · 07-03-2008, 11:48 PM

Quote:

Originally Posted by kyle14x7

I'm trying to post my pics but I keep geting an invalide file error under attachments when I try to upload

You can add them to your album on your profile and then link them from there.

kyle14x7 · 07-04-2008, 09:34 AM

img_0173.jpg

img_0174.jpg

img_0175.jpg

img_0176.jpg This is the picture of the chasie(I dont know how to rotate or increace the size of the pic

)

img_0177.jpg

One more question for now; How do you wire the control panal (with the ignition) to the motor? The owners manual doesnt tell you.

For now Im using the pull starter to start it and puting the chock on to shut off the engine. I only have a little idea of how to wire the panal to the engine and to the batery. Do you think you can take a pic. of how you wired it, or explain it to me? If you can that will be great, but if you cant I will figure it out. Thanks

Yamaha4life · 07-04-2008, 03:47 PM

There is no way with that engine to wire it up like your existing one. It is a pull start engine so therefore it has no starter. You will have to use the pull starter to start the cart. As for wiring it up to the battery, theres nothing on the engine to wire up because its a pull start so it doesnt require current.

kyle14x7 · 07-04-2008, 10:47 PM

The motor I got is electric start 16Hp powerMax . I neglected to mention that

I had the electric start option for an extra $50 so I got it. It did not come with instructions for what wire conects to what wire. I know where 2 of the five wires go. One of my bigest problems is I dont know what side of the starter solinoid is + and what side is - The side nearest to the engine or the side farthest from the engine? (Its not labled) I can only assume the positive side is the side with the ruber protector over it but I would rather not. What Im looking for is an answer of what wire ataches to what wire, and what side of the starter solinoid is + and what side is - Any more help would be great!

groundpounder · 07-05-2008, 01:17 AM

hey yamaha4life i pointed it out for you in the pic see the starter. (jk) with ya buddy

lol

Yamaha4life · 07-05-2008, 11:08 AM

Ahhh ok!! Haha. Thats what I get for text messaging and trying to post on here at the same time!

kyle14x7 · 07-05-2008, 11:22 AM

I still havent done any thing yet, still need to get some U-bolts to mount the unistrute to the frame. But is it safe to take off the throtal stop screw or at least move it back to get some more RPMs?

07-03-2008, 02:31 PM	#11
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61	Re: 16 Hp Chinese motor help One more thing I read in one of your older post that the 780 does not come with a bolt and it requiered a 7/16 fine thread bolt any idea on how long the bolt is, or is it a ganaric length? Thanks alot!
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61

07-03-2008, 07:05 PM	#13
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61	Re: 16 Hp Chinese motor help I'm trying to post my pics but I keep geting an invalide file error under attachments when I try to upload
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61

07-04-2008, 09:34 AM	#15
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61	Re: 16 Hp Chinese motor help img_0173.jpg img_0174.jpg img_0175.jpg img_0176.jpg This is the picture of the chasie(I dont know how to rotate or increace the size of the pic) img_0177.jpg One more question for now; How do you wire the control panal (with the ignition) to the motor? The owners manual doesnt tell you. For now Im using the pull starter to start it and puting the chock on to shut off the engine. I only have a little idea of how to wire the panal to the engine and to the batery. Do you think you can take a pic. of how you wired it, or explain it to me? If you can that will be great, but if you cant I will figure it out. Thanks
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61

07-04-2008, 03:47 PM	#16
Yamaha4life The Overposter! Join Date: Nov 2007 Location: Dixie Posts: 1,574	Re: 16 Hp Chinese motor help There is no way with that engine to wire it up like your existing one. It is a pull start engine so therefore it has no starter. You will have to use the pull starter to start the cart. As for wiring it up to the battery, theres nothing on the engine to wire up because its a pull start so it doesnt require current.

07-04-2008, 10:47 PM	#17
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61	Re: 16 Hp Chinese motor help The motor I got is electric start 16Hp powerMax . I neglected to mention that I had the electric start option for an extra $50 so I got it. It did not come with instructions for what wire conects to what wire. I know where 2 of the five wires go. One of my bigest problems is I dont know what side of the starter solinoid is + and what side is - The side nearest to the engine or the side farthest from the engine? (Its not labled) I can only assume the positive side is the side with the ruber protector over it but I would rather not. What Im looking for is an answer of what wire ataches to what wire, and what side of the starter solinoid is + and what side is - Any more help would be great!
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61

07-05-2008, 11:08 AM	#19
Yamaha4life The Overposter! Join Date: Nov 2007 Location: Dixie Posts: 1,574	Re: 16 Hp Chinese motor help Ahhh ok!! Haha. Thats what I get for text messaging and trying to post on here at the same time!

07-05-2008, 11:22 AM	#20
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61	Re: 16 Hp Chinese motor help I still havent done any thing yet, still need to get some U-bolts to mount the unistrute to the frame. But is it safe to take off the throtal stop screw or at least move it back to get some more RPMs?
kyle14x7 Not Yet Wild Join Date: Jul 2008 Posts: 61

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Do the Chinese think Americans are stupid or something?	Videos
Replacing original motor with a GE motor???	Electric Club Car