Vanguard in a CC

kwjosh · 07-26-2012, 06:24 PM

I have a 99 CC that I am going to put a 18hp Vanguard in but would like to do it on a budget. I have read all the different threads and I know about the reverse rotation but what I was wondering about is would it be better to install it with the stub shaft method or with the jack shaft method. If I did the jack shaft method what teeth sprockets would I use where. I do have the engine sitting in the cart but have not bolted it down yet because I was not sure which way I was gonna mount it for sure yet. Any help or info would be greatly appreciated at this time.

kwjosh · 07-26-2012, 08:12 PM

Any ideas please............?

TheNewGuy · 07-26-2012, 08:31 PM

This would be everything you need. >http://www.cartpartsplus.com/club-ca...kit-18-hp.html

kwjosh · 07-26-2012, 08:37 PM

Thanks for the reply. I have seen that kit. The issue with that is I already have the engine so I do not need the whole kit.

pachanga90 · 07-26-2012, 09:06 PM

They should have the kit minus engine under a different part#,check with them online or call.

Tryn · 12-18-2012, 08:05 PM

I would go with the kit. I did it all from scratch and it was a pain in the ***.

07-26-2012, 06:24 PM	#1
kwjosh Not Yet Wild Join Date: May 2011 Posts: 34	Vanguard in a CC I have a 99 CC that I am going to put a 18hp Vanguard in but would like to do it on a budget. I have read all the different threads and I know about the reverse rotation but what I was wondering about is would it be better to install it with the stub shaft method or with the jack shaft method. If I did the jack shaft method what teeth sprockets would I use where. I do have the engine sitting in the cart but have not bolted it down yet because I was not sure which way I was gonna mount it for sure yet. Any help or info would be greatly appreciated at this time.
kwjosh Not Yet Wild Join Date: May 2011 Posts: 34

07-26-2012, 08:12 PM	#2
kwjosh Not Yet Wild Join Date: May 2011 Posts: 34	Re: Vanguard in a CC Any ideas please............?
kwjosh Not Yet Wild Join Date: May 2011 Posts: 34

07-26-2012, 08:31 PM	#3
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,055	Re: Vanguard in a CC This would be everything you need. >http://www.cartpartsplus.com/club-ca...kit-18-hp.html
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

07-26-2012, 08:37 PM	#4
kwjosh Not Yet Wild Join Date: May 2011 Posts: 34	Re: Vanguard in a CC Thanks for the reply. I have seen that kit. The issue with that is I already have the engine so I do not need the whole kit.
kwjosh Not Yet Wild Join Date: May 2011 Posts: 34

07-26-2012, 09:06 PM	#5
pachanga90 I Refuse To Get Stuck!!! Join Date: Jun 2010 Location: Hilton,NY Posts: 5,427	Re: Vanguard in a CC They should have the kit minus engine under a different part#,check with them online or call.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-18-2012, 08:05 PM	#6
Tryn Not Yet Wild Join Date: Jul 2012 Location: Michigan Posts: 51	Re: Vanguard in a CC I would go with the kit. I did it all from scratch and it was a pain in the ***.

Similar Threads
Thread	Forum
G-9 / 18 HP Vanguard	Golf Carts and Parts
16 hp vanguard	Clone Engine Swaps
23 hp vanguard CPP kit	Big Block Talk!
Help 16 hp vanguard	Big Block Talk!
BB 23 Vanguard	Big Block Talk!