|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
09-10-2012, 01:37 PM | #1 |
Gone Wild
Join Date: Feb 2011
Location: Canyon Lake, CA
Posts: 166
|
Need parts list to rebuild 18HP B&S Vanguard
What exactly do I need to get to rebuild my Vanguard 18HP. I have seen kits on internet, but I may need rods too. Just wondering what all is needed so start to see if it is cost effective to rebuild or replace with a new engine. New engine is about $1200.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-10-2012, 07:51 PM | #2 |
Not Yet Wild
Join Date: Jan 2012
Posts: 62
|
Re: Need parts list to rebuild 18HP B&S Vanguard
Dano just my opinion, not that I am an expert. A stock rebuild can be done if all your hard parts are good for 2-300. If you start throwing speed parts (like some itiot I know) then you will have that $1200 in parts and pieces. Now there is a line that can be made but that idiot has the attitude "well if I'm doin this, then I need to do that. That's where I lost track of what I spent, but it's better drinkin beer uh oh building a motor on your own. But keep in mind that you will have a beast of a motor for that kind of cash. Ok that was 3 cents..
|
09-10-2012, 08:22 PM | #3 | |
Gone Wild
Join Date: Feb 2011
Location: Canyon Lake, CA
Posts: 166
|
Re: Need parts list to rebuild 18HP B&S Vanguard
Quote:
|
|
09-10-2012, 09:52 PM | #4 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: Need parts list to rebuild 18HP B&S Vanguard
It could be a broken ring to a broken/seized rod i read your other posts sounds like it got hot and seized the rods to the crank seen it many times at the track AND from me hammering the crap out of one too...lol if thats the case then inspect your crank when you get it out hit it with some light sandpaper (320-400 grit) an clean it up an get some new rods/rings if the cylinders and walls look good scuff em up lightly w/ the same grit sandpaper clean it up and lube the cylider walls and re-assemble....
|
09-11-2012, 09:42 AM | #5 | |
Gone Wild
Join Date: Feb 2011
Location: Canyon Lake, CA
Posts: 166
|
Re: Need parts list to rebuild 18HP B&S Vanguard
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
18hp Vanguard help? | Big Block Talk! | |||
Fan for 18HP Vanguard | Big Block Talk! | |||
Oil change on 18HP B&S Vanguard? | Big Block Talk! | |||
'03 EZ-GO/18hp. Vanguard | Big Block Talk! | |||
18hp Vanguard | Golf Carts and Parts |