|
| |||||||
| BGW Gear | Register | Golf Cart Pics | Site Sponsors | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
| | Thread Tools | Search this Thread | Display Modes |
08-06-2008, 08:49 AM
| #1 |
| Admin/Moderator    Join Date: Dec 2006 Location: Ohio
Posts: 10,430
|  B&S engine info Thanks Shawn M. |
| | |
|  |
 Today
| |
| Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
|
08-06-2008, 09:19 AM
| #2 |
| Gone Wild  Join Date: Aug 2007 Location: near sacramento,ca
Posts: 1,725
| Re: B&S engine info Thanks Ron! My 20hp motor wiring diagram is on page 11 |
|
| |
|
08-09-2008, 09:24 AM
| #3 |
| Never to old to learn  Join Date: Oct 2007 Location: Tacoma Washington
Posts: 3,511
| Re: B&S engine info Thanks Shawn M. Found my problem the other day. When I "spliced" my stock harness to lengthen it......one butt connector was not crimped well and came undone. Wilson runs fine again. Dave |
| |
|
08-09-2008, 09:59 AM
| #4 |
| Gone Wild Join Date: Aug 2007 Location: near sacramento,ca
Posts: 1,725
| Re: B&S engine info no problem helping others should be what a forum is about. Did you remove the fuel cut off from the float bowl? I am thinking about doing this as it is supposed to help a little bit on the fuel flow. |
|
| |
|
10-06-2008, 08:19 PM
| #5 |
| Getting Wild  Join Date: Sep 2008 Location: FOLEY,ALABAMA 36535
Posts: 84
| Re: B&S engine info would you wire your vtwin to crank, and idle?, how would you make up the throttle cale?, do they offer a special cable you can buy for upgrade? |
|
| |
|
10-06-2008, 09:11 PM
| #6 |
| Gone Wild Join Date: Aug 2007 Location: near sacramento,ca
Posts: 1,725
| Re: B&S engine info i have mine set to crank and idle. read my build thread for pictures |
|
| |
|
02-20-2010, 08:59 PM
| #7 |
| Not Yet Wild Join Date: Feb 2010 Location: Southwest of Fort Worth, TX
Posts: 23
| Re: B&S engine info What modifications would you have to do to fit a 25-30hp Briggs or kohler into a 2009 club car precedent. Another question is what is the max rpm of a 25-30 hp engine. I would like to know what the top speed of a 25-30hp engine would give in comparison to the 31.5 that the 11.5@3600 rpm. |
|
| |
|
02-20-2010, 10:06 PM
| #8 |
| Gone Wild Join Date: Aug 2007 Location: near sacramento,ca
Posts: 1,725
| Re: B&S engine info max RPM depends on how you build it. with a rev kit and timing advance your going to see 4500 rpm. maybe even 5500. the small blocks -23 and under like to rev more than the 25hp and up. it all depends on your wallet |
|
| |
|
02-20-2010, 10:44 PM
| #9 |
| Not Yet Wild Join Date: Feb 2010 Location: Southwest of Fort Worth, TX
Posts: 23
| Re: B&S engine info If you put a rev kit on it will it pose a threat to the engine turning more RPM with heat? I would be afraid of burning it up (the 11.5hp). |
|
| |
|
02-20-2010, 10:58 PM
| #10 |
| Gone Wild Join Date: Aug 2007 Location: near sacramento,ca
Posts: 1,725
| Re: B&S engine info please ask your question in the forum instead of the sticky thread. |
|
| |
|
| ||||||
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| yamaha G-2 info | Lifted Golf Carts | |||
| Info Help on CC's | Electric Club Car | |||
| Amsoil Synthetic engine oil or Royal Purple engine oil | Big Block Talk! | |||
| Need Help with parts and other info. | Gas EZGO | |||
| Guest info | Announcements | |||
Linear Mode
