BIG Big Block

turnagainhardcore · 09-01-2008, 07:52 PM

This will the the official thread for my GSXR install, its a 1992 GSXR 750. the motor is a four banger four stroke. I have had it running once before putting it in the cart, and man those straight headers were loud!!! I have A few things to sort out on the motor before I will be putting it in:
First, I noticed that the plug on one of the oil galleries had the wrong sized bolt in it so it was leaking slightly, so i will be ordering a new one of those,

Second, I need to get longer throttle cables to go to the pedal

Third, I need to figure out how the choke works on this bad boy, I have a cable, but I can't seem to get it to do anything to the choke when I pull on it.

Fourthly, I have to get some type of hydrolic brake set up on her too, I have a spot to put a master cylinder but I just need to find one small enough.

I will be getting some A-Arms off of a sport quad, and hope to find some that have a front brake set up on them so that I can stop this thing!!!!
I will also need to get a solid rear axle and brake set up for the rear end of this baby.
and I will be buying four coil overs from a sport quad to go in the corners.

The frame is a G-1, but I have fitted it with a G-16 body on it, i also have a 2000 LB winch on the front of this baby hidden behind a monster bumper, which I am now going to make bigger and add lights to it as well. I have made a custom Roll cage for this suckka, and I have two boat seats to install into it for the passengers.
As of right now I have the stock 8 inch rims with 22x12 Mud lites on, but I think I am going to sell them and get some 12 inch rims and some 27 inch tires for this thing, it will look sweet and will help tame this beast!!!

I will get some Pics up soon, any imput would be taken with pleasure!!

turnagainhardcore · 09-01-2008, 07:56 PM

These blue seats are no longer on, now I ahve boat seats that I will use instead.

[IMG]

http://pic20.picturetrail.com/VOL175/7409936/18113539/284353120.jpg[/IMG]

turnagainhardcore · 09-02-2008, 04:12 PM

I am going today to a Cycle salvage place today, I called and they said that they had a solid rear axle, front a-arms and coil overs, disk brakes and the hubs for rims, gear and brake to mount to.
I will get some pics of the parts that I pick up if they are for the right price, if i can get it for the right price.

EVLLS1 · 09-02-2008, 05:03 PM

where are you from? i might be interested in the rear axle and motor if you're not too far away (shipping cost may suck if you're too far)

turnagainhardcore · 09-02-2008, 05:58 PM

??? I am from Edmonton, Alberta, Canada. ... Are you thinking I am selling this set up?? Not too sure what your getting at here?

EVLLS1 · 09-02-2008, 06:00 PM

nevermind too far... figured you sell the stock motor and rear.... know i am when i do my 4banger install later

turnagainhardcore · 09-02-2008, 06:02 PM

oh sorry, I have already sold the stoker any way, it was a non running G-1 piece of crap anyway

turnagainhardcore · 09-02-2008, 06:04 PM

I never made it to the Cycle Salvage place before it closed today, so I will have to wait untill tommorow to get the stuff, so I will have to make you guys wait one more day to see, what I will be throwing into this bad boy.

I can't wait to see what a 110 six speed golf cart feels like.

Oh and I have a Vance and Hanes performance pipe that I will try to use to muffle this thing

TheNewGuy · 09-02-2008, 06:13 PM

Sounds like it will be a Buggy Gone Wild!!

turnagainhardcore · 09-03-2008, 06:26 PM

I just got back from the cycle salvage palce and it looks like i will be taking home a susuki 250 quad racer frame. it has everything that i need, I will take the pics off my phone and show you guys when i get a chance. once its all installed I will have hydrolic front and rear brakes with this set up, and with coil overs in the front and in the rear.
What I will do is cut the rear axle off with the bearing assembly and everything and weld that up to the rear swing arm on the cart, then cut the frame off right behind the front suspention and then weld that up, run the brake lines, get a master cylinder set up and I will be able to stop this baby.
I hope to get the motor mounted on the swing arm this weekend weather permitting. then I need to figure out how I will run the shifter.

09-01-2008, 07:52 PM	#1
turnagainhardcore Gone Wild Join Date: Nov 2007 Location: Leduc Posts: 300	BIG Big Block This will the the official thread for my GSXR install, its a 1992 GSXR 750. the motor is a four banger four stroke. I have had it running once before putting it in the cart, and man those straight headers were loud!!! I have A few things to sort out on the motor before I will be putting it in: First, I noticed that the plug on one of the oil galleries had the wrong sized bolt in it so it was leaking slightly, so i will be ordering a new one of those, Second, I need to get longer throttle cables to go to the pedal Third, I need to figure out how the choke works on this bad boy, I have a cable, but I can't seem to get it to do anything to the choke when I pull on it. Fourthly, I have to get some type of hydrolic brake set up on her too, I have a spot to put a master cylinder but I just need to find one small enough. I will be getting some A-Arms off of a sport quad, and hope to find some that have a front brake set up on them so that I can stop this thing!!!! I will also need to get a solid rear axle and brake set up for the rear end of this baby. and I will be buying four coil overs from a sport quad to go in the corners. The frame is a G-1, but I have fitted it with a G-16 body on it, i also have a 2000 LB winch on the front of this baby hidden behind a monster bumper, which I am now going to make bigger and add lights to it as well. I have made a custom Roll cage for this suckka, and I have two boat seats to install into it for the passengers. As of right now I have the stock 8 inch rims with 22x12 Mud lites on, but I think I am going to sell them and get some 12 inch rims and some 27 inch tires for this thing, it will look sweet and will help tame this beast!!! I will get some Pics up soon, any imput would be taken with pleasure!!

09-01-2008, 07:56 PM	#2
turnagainhardcore Gone Wild Join Date: Nov 2007 Location: Leduc Posts: 300	Re: BIG Big Block These blue seats are no longer on, now I ahve boat seats that I will use instead. [IMG]http://pic20.picturetrail.com/VOL175/7409936/18113539/284353120.jpg[/IMG]

09-02-2008, 04:12 PM	#3
turnagainhardcore Gone Wild Join Date: Nov 2007 Location: Leduc Posts: 300	Re: BIG Big Block I am going today to a Cycle salvage place today, I called and they said that they had a solid rear axle, front a-arms and coil overs, disk brakes and the hubs for rims, gear and brake to mount to. I will get some pics of the parts that I pick up if they are for the right price, if i can get it for the right price.

09-02-2008, 05:03 PM	#4
EVLLS1 Gone Wild Join Date: Jul 2008 Location: Georgia Posts: 365	Re: BIG Big Block where are you from? i might be interested in the rear axle and motor if you're not too far away (shipping cost may suck if you're too far)

09-02-2008, 05:58 PM	#5
turnagainhardcore Gone Wild Join Date: Nov 2007 Location: Leduc Posts: 300	Re: BIG Big Block ??? I am from Edmonton, Alberta, Canada. ... Are you thinking I am selling this set up?? Not too sure what your getting at here?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-02-2008, 06:00 PM	#6
EVLLS1 Gone Wild Join Date: Jul 2008 Location: Georgia Posts: 365	Re: BIG Big Block nevermind too far... figured you sell the stock motor and rear.... know i am when i do my 4banger install later

09-02-2008, 06:02 PM	#7
turnagainhardcore Gone Wild Join Date: Nov 2007 Location: Leduc Posts: 300	Re: BIG Big Block oh sorry, I have already sold the stoker any way, it was a non running G-1 piece of crap anyway

09-02-2008, 06:04 PM	#8
turnagainhardcore Gone Wild Join Date: Nov 2007 Location: Leduc Posts: 300	Re: BIG Big Block I never made it to the Cycle Salvage place before it closed today, so I will have to wait untill tommorow to get the stuff, so I will have to make you guys wait one more day to see, what I will be throwing into this bad boy. I can't wait to see what a 110 six speed golf cart feels like. Oh and I have a Vance and Hanes performance pipe that I will try to use to muffle this thing

09-02-2008, 06:13 PM	#9
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,052	Re: BIG Big Block Sounds like it will be a Buggy Gone Wild!!
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

09-03-2008, 06:26 PM	#10
turnagainhardcore Gone Wild Join Date: Nov 2007 Location: Leduc Posts: 300	Re: BIG Big Block I just got back from the cycle salvage palce and it looks like i will be taking home a susuki 250 quad racer frame. it has everything that i need, I will take the pics off my phone and show you guys when i get a chance. once its all installed I will have hydrolic front and rear brakes with this set up, and with coil overs in the front and in the rear. What I will do is cut the rear axle off with the bearing assembly and everything and weld that up to the rear swing arm on the cart, then cut the frame off right behind the front suspention and then weld that up, run the brake lines, get a master cylinder set up and I will be able to stop this baby. I hope to get the motor mounted on the swing arm this weekend weather permitting. then I need to figure out how I will run the shifter.

Similar Threads
Thread	Forum
Which Big Block??	Big Block Talk!
To big block or not to big block	Big Block Talk!
I need a big block	Gas Club Car
big block	Gas Yamaha