briggs numbers?

rollnblock · 05-07-2013, 08:10 PM

Model: 386447
Type:0127-E1
Code: 06061411

these are the numbers from a possible engine i can get. would it be worth it?

500$ with 110 hours of run time.

1989Marathon · 05-07-2013, 08:22 PM

It should be a 23hp Vanguard with 1" keyed crank. Definitely worth $500 if everyhing is there. Starter, charging circuit, fuel pump. Offer $400 and see what happens.

rollnblock · 05-07-2013, 08:26 PM

i offered 40 he wouldnt take it. says it needs a coil to run. how much is a coil?

nobuckbuild · 05-07-2013, 08:39 PM

ok from what i see on parts tree it looks good if not the same as the 303447 engine we like to use in conversions my only problem would be the price hurdle if your going to build the engine up , removing the governer and upgrading the valve train and then add a 4-5 hundred dollar clutch, i know personally i have almost 1k in my engine and still need some parts check out another members posts 1989marathon he built one that is now able to churn 7k rpm , i know most other members would gladly pay 500 for an engine but i figure if i have to get that deep in an engine a full bore and rebuild is going to happen i have to start with a bad engine or cheap one. if you are just going to use it as a stock and not crack it open and spend a fortune internally

nobuckbuild · 05-07-2013, 08:41 PM

i've got a 16 vanny coil if you end up needing one. if thats the problem ask him if he could put the coil on so you could hear it run. pm me i'll send it out.

1989Marathon · 05-07-2013, 08:42 PM

About $40 each. There are two of them. Unless both of them are bad, it should start with just one good coil. More than likely, the diodes are bad in the kill wire. That costs about $3 to fix.

rollnblock · 05-07-2013, 08:47 PM

ok i also hav a 303777 sitting here. vertical shaft what can i pull from, what can interchange to make a good engine?

1989Marathon · 05-07-2013, 08:54 PM

There are a lot of parts that fit. The coils don't appear to be one of them though.

nobuckbuild · 05-07-2013, 09:01 PM

not to hijack but marathon can you dial in my new rebuild with that carb and intake setup this summer, Im actually heading up that way this weekend and would love to stop by and see it in person

1989Marathon · 05-07-2013, 09:06 PM

PM sent

05-07-2013, 08:10 PM	#1
rollnblock Not Yet Wild Join Date: Nov 2011 Posts: 30	briggs numbers? Model: 386447 Type:0127-E1 Code: 06061411 these are the numbers from a possible engine i can get. would it be worth it? 500$ with 110 hours of run time.
rollnblock Not Yet Wild Join Date: Nov 2011 Posts: 30

05-07-2013, 08:22 PM	#2
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: briggs numbers? It should be a 23hp Vanguard with 1" keyed crank. Definitely worth $500 if everyhing is there. Starter, charging circuit, fuel pump. Offer $400 and see what happens.
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

05-07-2013, 08:26 PM	#3
rollnblock Not Yet Wild Join Date: Nov 2011 Posts: 30	Re: briggs numbers? i offered 40 he wouldnt take it. says it needs a coil to run. how much is a coil?
rollnblock Not Yet Wild Join Date: Nov 2011 Posts: 30

05-07-2013, 08:39 PM	#4
nobuckbuild Gone Wild Join Date: Mar 2012 Location: CENTRAL PENNSYLVANIA Posts: 1,466	Re: briggs numbers? ok from what i see on parts tree it looks good if not the same as the 303447 engine we like to use in conversions my only problem would be the price hurdle if your going to build the engine up , removing the governer and upgrading the valve train and then add a 4-5 hundred dollar clutch, i know personally i have almost 1k in my engine and still need some parts check out another members posts 1989marathon he built one that is now able to churn 7k rpm , i know most other members would gladly pay 500 for an engine but i figure if i have to get that deep in an engine a full bore and rebuild is going to happen i have to start with a bad engine or cheap one. if you are just going to use it as a stock and not crack it open and spend a fortune internally

05-07-2013, 08:41 PM	#5
nobuckbuild Gone Wild Join Date: Mar 2012 Location: CENTRAL PENNSYLVANIA Posts: 1,466	Re: briggs numbers? i've got a 16 vanny coil if you end up needing one. if thats the problem ask him if he could put the coil on so you could hear it run. pm me i'll send it out.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-07-2013, 08:42 PM	#6
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: briggs numbers? About $40 each. There are two of them. Unless both of them are bad, it should start with just one good coil. More than likely, the diodes are bad in the kill wire. That costs about $3 to fix.
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

05-07-2013, 08:47 PM	#7
rollnblock Not Yet Wild Join Date: Nov 2011 Posts: 30	Re: briggs numbers? ok i also hav a 303777 sitting here. vertical shaft what can i pull from, what can interchange to make a good engine?
rollnblock Not Yet Wild Join Date: Nov 2011 Posts: 30

05-07-2013, 08:54 PM	#8
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: briggs numbers? There are a lot of parts that fit. The coils don't appear to be one of them though.
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

05-07-2013, 09:01 PM	#9
nobuckbuild Gone Wild Join Date: Mar 2012 Location: CENTRAL PENNSYLVANIA Posts: 1,466	Re: briggs numbers? not to hijack but marathon can you dial in my new rebuild with that carb and intake setup this summer, Im actually heading up that way this weekend and would love to stop by and see it in person

05-07-2013, 09:06 PM	#10
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: briggs numbers? PM sent
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

Similar Threads
Thread	Forum
Vin numbers	Gas EZGO
Serial numbers	Gas Yamaha
Serial numbers	Gas Yamaha
What do the numbers mean ?	Electric EZGO
Numbers	Electric golf carts