|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
10-10-2013, 09:32 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2012
Posts: 24
|
Lifted/Stretched/GSXR 600 EZgo
finally have the time to get started on my build, so i figured i would get a thread going to keep track of it. dont really know much about golf carts or the different models, parts etc. but, i am a fab guy by hobby, so i dig this kinda stuff. started with a bunch of parts that i bought from a friend...
       |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-10-2013, 09:33 PM
|
#2 |
|
Not Yet Wild
Join Date: Oct 2012
Posts: 24
|
Re: Lifted/Stretched/GSXR 600 EZgo
oh, and the axles...
 |
|
|
|
|
10-10-2013, 09:44 PM
|
#3 |
|
Not Yet Wild
Join Date: Oct 2012
Posts: 24
|
Re: Lifted/Stretched/GSXR 600 EZgo
first thing i had to do was get the rear hubs to fit the wheels. my buddy that bought the wheels bought all 4 with the 4 on 4 bolt pattern. the rear hubs/axle are from a gas cart i think which has the 5 lug hubs. figured i could cut the flange with the 5 holes off and make my own. it was a little bit more difficult that i had imagined with my limited tooling, but they turned out good. the 4 on 4 pattern ended up within about .005" any way i measured between/across holes, so i think that is acceptable. anyways...
old hub  hub cut and turned down for the new flange/face  started with raw steel plate for the new flange  center drilled and bored for hub center  finishing OD on flange  ready to weld  welded  |
|
|
|
|
10-10-2013, 09:51 PM
|
#4 |
|
Not Yet Wild
Join Date: Oct 2012
Posts: 24
|
Re: Lifted/Stretched/GSXR 600 EZgo
next step, i figured some width would be a good thing to add some stability since i plan on having a fairly high ride height. added 6". figured i could add wheel spacers out back, but i think my plans may have changed now.
didn't get any pics during, but here it is finished. added some 1x2 tubing and fishplate-like pieces across both joints.  |
|
|
|
|
10-10-2013, 09:53 PM
|
#5 |
|
Not Yet Wild
Join Date: Oct 2012
Posts: 24
|
Re: Lifted/Stretched/GSXR 600 EZgo
 |
|
|
|
|
10-10-2013, 09:54 PM
|
#6 |
|
Not Yet Wild
Join Date: Oct 2012
Posts: 24
|
Re: Lifted/Stretched/GSXR 600 EZgo
potential ride height...
 |
|
|
|
|
10-10-2013, 10:12 PM
|
#7 |
|
Gone Wild
Join Date: Apr 2010
Location: Santaquin, Utah
Posts: 585
|
Re: Lifted/Stretched/GSXR 600 EZgo
Looks good, keep up the pics and info..
|
|
|
|
|
10-10-2013, 11:55 PM
|
#8 |
|
Gone Wild
Join Date: Nov 2008
Location: Texas Hill Country
Posts: 426
|
Re: Lifted/Stretched/GSXR 600 EZgo
nice job so far, cant wait to see the progress
|
|
|
|
|
10-12-2013, 07:40 PM
|
#9 |
|
Not Yet Wild
Join Date: Oct 2012
Posts: 24
|
Re: Lifted/Stretched/GSXR 600 EZgo
got the link mounts pretty much done for the front axle and on the cart.
its been a while since i mig welded. been tig'ing everything for about the last 2 years doing drag frames. forgot how quick things go with mig and dirty metal, haha.      |
|
|
|
|
10-12-2013, 07:43 PM
|
#10 |
|
Not Yet Wild
Join Date: Oct 2012
Posts: 24
|
Re: Lifted/Stretched/GSXR 600 EZgo
oops, forgot one...
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Lifted/stretched precedent steering issues | Electric Club Car | |||
| 18hp ezgo stretched limo | Golf Carts and Parts | |||
| Xtreme's Lifted, Locked, and Stretched Off Road Buggy Build Up!! | Members Rides | |||
| 94 ezgo stretched question | Electric EZGO | |||
| Stretched & lifted | Electric EZGO | |||
Linear Mode
