|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
11-06-2013, 01:14 PM | #1 |
Not Yet Wild
Join Date: Mar 2010
Location: Tampa
Posts: 51
|
Diagram Needed..
Guys, I've recently installed the Duromax 16hp... I'm wanting to use my s/g as the starter. Only I want to use a automotive style key start and not the peddle start. Does anyone out there have a wireing diagram of the paticular setup?
I have a 94 Club Car Carry-All 2.. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-06-2013, 05:40 PM | #2 |
Gone Wild
Join Date: Jul 2012
Location: S.E. WIS
Posts: 176
|
Re: Diagram Needed..
If my thinking is correct - You should be able to disconnect the pedal controlled mirco switch wire(in the black box)that sends the signal to the solenoid which completes the circuitry that turns the S/G. Connect your "start" wire to it so when you turn the key to start, it sends the signal to the solenoid and thus the S/G should spin. I have not done this but seems simple enough. Maybe others can chime in...heres a picture of the mirco switches in the black box over of the throttle cable linkage and right of the voltage regulator.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Western ID & Wiring Diagram Needed | Electric golf carts | |||
wiring diagram needed | Electric EZGO | |||
wiring diagram needed | Electric EZGO | |||
82 g1 wire diagram needed | Electric Yamaha | |||
'94 CC DS wiring diagram needed | Electric Club Car |