|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
12-01-2013, 04:58 PM | #1 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
prepping for Zilla-Twin...
As you may know with the help of good friends on here i got Cart-Zilla 3.0 built after i bought a burned out frame for $200 and did a V-Twin swap on it and a lift ... Well the ole' 16 vanny served me well this summer gave me a lil taste of the bb life .... Today me and my nephew took th' vanny out to tear it down an get it prepped to rebuild ,,,mild port job, true the heads up and a new cam and so on i'll get a few pics up soon...stay tuned this could get awesome .....
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-01-2013, 07:34 PM | #2 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: prepping for Zilla-Twin...
Are you going with a 2-barrel carb?
|
12-01-2013, 07:51 PM | #3 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: prepping for Zilla-Twin...
of course i wanna do a sc later on down the road you think 20 thou cut on the heads will be ok ?? i know you need comp. ratio kinda low for those things...
|
12-01-2013, 08:00 PM | #4 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: prepping for Zilla-Twin...
I took .060" off of my heads and I'm running the stock Graphoil gaskets again.
|
12-01-2013, 08:05 PM | #5 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: prepping for Zilla-Twin...
20-60 should be fine then ...
|
12-03-2013, 04:06 PM | #6 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: prepping for Zilla-Twin...
pics as i promised oooookkkk those suck we'll try again
|
12-03-2013, 04:18 PM | #7 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: prepping for Zilla-Twin...
try this again...
|
12-03-2013, 04:22 PM | #8 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: prepping for Zilla-Twin...
it was surprising so clean on the inside and no visual signs of wear ....not bad for a 1991 briggs now need to find rings, gasket and seal set for it....
|
12-03-2013, 05:35 PM | #9 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: prepping for Zilla-Twin...
Go here. They have a great parts lookup by engine model number. The best consistant pricing I have found.
Briggs Engine Parts |
12-03-2013, 05:45 PM | #10 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: prepping for Zilla-Twin...
i found all my parts here for around $150...www.smallenginepartswarehouse.com
|
|
|
Similar Threads | ||||
Thread | Forum | |||
ZILLA slangin mud...lol | Videos | |||
420 predator swap prepping | Clone Engine Swaps | |||
Prepping 80 marathon body | Body and Paint | |||
beatin' on ole 'ZILLA | Big Block Talk! | |||
Cleaning & Prepping Chassis | Body and Paint |