Clone in cc with ccw motor help!

crryallcrwler

Sorry for blowing up post but I'm stumped right now with this motor. Bought a vegas carts motor for my 2000 carry all 2. Only Delima right now is the cw motor with my ccw axel. If I run reverse as forward will adding hs gears change reverse to? I'm not to worried about the faster speeds in reverse than forward. Another option Is the jack shaft, that just seems like a lot if work but maybe I'm over looking it. Also my 440 should be able to get 6500 rpms so I may still be able to push some speed? Any input helps really in a pinch right now over what to do.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Dave in VA

Check out the first 6 posts here...

http://www.buggiesgonewild.com/big-b...e-forward.html

crryallcrwler

Thanks a lot that really helped. So running in reverse seems to not be a big deal and running 8.1 gears is a common thing it seems like thanks .

corkscrew

Has someone changed the rear-end. A 2000 cc has a cw rear. 97 to present are cw rearends. From 97 and older have the ccw rear

crryallcrwler

I'd do the jack shaft anyday over the rear end they can be hard to find and very pricey. Unless one landed right in front of me I wouldn't consider it I think I'm just gonna run in reverse for now

rib33024

As corkscrew said in a earlier post, if your cart is a 2000 the rear should be a CW rear no need to run in reverse right ?

crryallcrwler

All motors are ccw not cw that's why 1997-now is cw which is backwards

rib33024

the 420/440 clone is a CCW motor not a CW motor, and the 2000 cc is a CW rearend for forward




Specifications
Name 13/16 HP (420/440cc) OHV Horizontal Shaft Gas Engine

Brand Predator Engines

Capacity 1 gal.
Certification EPA & CARB
Diameter 90 mm
Engine Cycles 4
Engine displacement (cc) 420/440cc
Horizontal or Vertical Horizontal
Horsepower (hp) 13/16
Maximum speed (rpm) 3600 RPM
Maximum Torque (ft. - lbs.) 18.4 ft. lbs. @ 2500 RPM
Motor type Single Cylinder OHV
Mounting pattern 195.5mm L x 86.0mm W - 103.0mm W (7.7" L x 3.4" W - 4.1" W )
Shaft output Counterclockwise
Shaft rotation direction Counter clockwise
Sound rating (dB) 108 dB
Start type Electric start with recoil backup
Product Height 17.1 in.
Product Length 18.9 in.
Product Weight 73 lbs. / 33 kg
Product Width 13.8 in.
Shaft length (in.) 3.48" (88.5mm)
Shipping Weight 86.25 lb.
Stroke length (in.) 66 mm
Warranty 90 Day
Customer Reviews
Product Manual

crryallcrwler

I should be fine pushing 6800 rpms

JcXtreme72

Run it in reverse for now and either get a set of 8:1 gears or search for a '96 and older CCW rear end and swap it in. If you can find a carryall 272 you can even score a cable locker!