Big Block is IN AND RUNS!!!! CAW ride.

beater cart · 05-13-2014, 08:51 PM

I was able to put the motor in the cart tonight...
Finished wiring it up in the motor bay side, made the header, battery cables, and plumed the fuel to it. Turned the key and it fired up. all gauges work and good oil pressure. But of course a few glitches carb started to flood over and it needs more return spring on carb linkage.
Tomorrow night we will install the muffler and put the carb back on torque the axel nuts and try and go for a ride.
And a big thanks to my friend Roy for doing the big portion of the fab work.

LostHusker · 05-13-2014, 08:53 PM

Congrats

beater cart · 05-13-2014, 08:57 PM

Thank You Husker. A little bit at a time, I think tomorrow night will be my first big block ride I can not wait.

LostHusker · 05-13-2014, 09:08 PM

You need to take that governor off that rear axle, you don't need it.

beater cart · 05-13-2014, 09:14 PM

I drilled out the arm so that it just floats on the shaft. Using the 1 1/8 bore carb off of a 35 hp motor and the linkage needed to be pulled to work not to mention carb needed .400 movement and throttle cable would do 1.400 that was the fastest way to hook it up that we could come up with.

LostHusker · 05-13-2014, 09:16 PM

That will work, I was just going by the pic....

Good luck on the maiden voyage

beater cart · 05-13-2014, 09:19 PM

Its got to work.

LostHusker · 05-13-2014, 09:25 PM

Quote:

Originally Posted by beater cart

Its got to work.

I still need to tinker with mine some more,, guess I will do it when i get there. Need to load things up tomorrow evening leave early Thursday.

beater cart · 05-13-2014, 09:36 PM

Travel Safely.

LostHusker · 05-13-2014, 09:40 PM

Quote:

Originally Posted by beater cart

Travel Safely.

Same to you, see you there.

05-13-2014, 08:53 PM	#2
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: Big Block is IN AND RUNS!!!! CAW ride. Congrats

05-13-2014, 08:57 PM	#3
beater cart Gone Wild Join Date: Nov 2012 Posts: 567	Re: Big Block is IN AND RUNS!!!! CAW ride. Thank You Husker. A little bit at a time, I think tomorrow night will be my first big block ride I can not wait.
beater cart Gone Wild Join Date: Nov 2012 Posts: 567

05-13-2014, 09:08 PM	#4
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: Big Block is IN AND RUNS!!!! CAW ride. You need to take that governor off that rear axle, you don't need it.

05-13-2014, 09:14 PM	#5
beater cart Gone Wild Join Date: Nov 2012 Posts: 567	Re: Big Block is IN AND RUNS!!!! CAW ride. I drilled out the arm so that it just floats on the shaft. Using the 1 1/8 bore carb off of a 35 hp motor and the linkage needed to be pulled to work not to mention carb needed .400 movement and throttle cable would do 1.400 that was the fastest way to hook it up that we could come up with.
beater cart Gone Wild Join Date: Nov 2012 Posts: 567

05-13-2014, 09:16 PM	#6
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: Big Block is IN AND RUNS!!!! CAW ride. That will work, I was just going by the pic.... Good luck on the maiden voyage

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-13-2014, 09:19 PM	#7
beater cart Gone Wild Join Date: Nov 2012 Posts: 567	Re: Big Block is IN AND RUNS!!!! CAW ride. Its got to work.
beater cart Gone Wild Join Date: Nov 2012 Posts: 567

05-13-2014, 09:36 PM	#9
beater cart Gone Wild Join Date: Nov 2012 Posts: 567	Re: Big Block is IN AND RUNS!!!! CAW ride. Travel Safely.
beater cart Gone Wild Join Date: Nov 2012 Posts: 567

Similar Threads
Thread	Forum
Runs 10 minutes then shuts off, wait 5 then runs again...	Electric EZGO
Fuse Block/ Ground Block.... what are you guys using	Electric EZGO
G1, idles great, runs rough, runs better when warm	Gas Yamaha
runs good cold runs bad hot?	Gas EZGO
Reverse...runs awesome Forward..runs bad	Gas EZGO