|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
09-18-2014, 11:32 PM | #1 |
Not Yet Wild
Join Date: May 2014
Location: Pebble Beach CA.
Posts: 22
|
Vanny exhaust flanges??
I'm gonna have to build a custom header for my bb vanny looked at v.c. but looks like they only care about clones anybody seen exhaust flanges on any sites??? Thanks beforehand
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-19-2014, 05:02 AM | #2 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: Vanny exhaust flanges??
I seen a set on eBay for $20 shipped.
|
09-19-2014, 09:04 AM | #3 |
Not Yet Wild
Join Date: May 2014
Location: Pebble Beach CA.
Posts: 22
|
Re: Vanny exhaust flanges??
|
09-19-2014, 12:31 PM | #4 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: Vanny exhaust flanges??
I'm in the same boat low_horse. If you find a source let me know. I'll be making an exhaust too.
|
09-23-2014, 01:52 PM | #5 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: Vanny exhaust flanges??
Found some flanges on eBay...3/8" thick.
Item number is 221383523024. Went back and looked again, they may be for smaller Briggs motors but it gives the bolt spacing. I don't have a block here at work with me to check. |
09-26-2014, 12:26 PM | #6 |
Gone Wild
Join Date: Jun 2014
Posts: 330
|
Re: Vanny exhaust flanges??
I measured 43.5 mm or just under 1'' 3/4 at about 1''11/16 bolt centers
etx hole is 1'' but BOLTS AT 1 11/16 is NOT 1.55 MORE LIKE 1.7X on a 16 hp B&S el start with external oil filter MAYBE THE GOKART SINGLES ARE A BIT CLOSER SPACED THEN THE V-TWINS BTW IS THE FLANGE LISTED A 9.99 ALUMINUM ALLOY [NOT STEEL] AND HARDER TO GET WELDED ? |
09-27-2014, 04:33 PM | #7 |
Not Yet Wild
Join Date: Feb 2009
Location: douglas ga
Posts: 21
|
Re: Vanny exhaust flanges??
Robertson torque tubes has the flanges and pipes
|
09-27-2014, 05:28 PM | #8 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: Vanny exhaust flanges??
I got my clone exhaust made custom there and it worked great, he will make anything for you he flared mine to 1.5" and I welded it into a car muffler. He sent me pics of the whole thing before he sent it to make sure it was right. It had a slide tube so it could adjust length, and also a coupling so it can rotate. I chose to weld it up myself. Or you can order parts or kits.
|
09-29-2014, 08:25 AM | #9 |
Feral
Join Date: Feb 2011
Location: Central Miss
Posts: 1,931
|
Re: Vanny exhaust flanges??
1" washer,..get gasket for pattern,.....drill two holes,.....grind away what you don't need,....about $2 and 15 minutes
|
09-29-2014, 09:55 AM | #10 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: Vanny exhaust flanges??
Good idea Unforgiven.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Vanny exhaust system??? | Big Block Talk! | |||
23 hp vanny? | Big Block Talk! | |||
81 exhaust problems, need exhaust stack | Gas EZGO | |||
VW Beetle exhaust on a Vanny 18 | Big Block Talk! | |||
Bad Vanny | Big Block Talk! |