05-23-2018, 01:26 PM | #1 |
Getting Wild
Join Date: May 2017
Posts: 87
|
Throttle cables
Looking for some insight on throttle cable setups.pics would be great.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-24-2018, 11:04 AM | #2 |
Feral
Join Date: Feb 2011
Location: Central Miss
Posts: 1,931
|
Re: Throttle cables
I used my stock pedal. Made a bracket and attached the ATV cable to the pedal.
thought I had a picture on my computer but I don't |
05-24-2018, 12:34 PM | #3 |
Getting Wild
Join Date: May 2017
Posts: 87
|
Re: Throttle cables
I figured it out.i will post pics up later.i used a couple throttle cams from junk yard cars throttle body. Welded that to the throttle shaft of a stock cart pedal.got some bicycle cables and cut and soldered correct ends onto the cable. I got the geometry of the pedal at wot to match the carb at wot so im happy.
I do understand about using the atv cable.but my cart is 11.5ft long stretched in the middle so it wasnt long enough to work that way for me. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Adjusting throttle cables | Gas Yamaha | |||
G22A Throttle Cables | Gas Yamaha | |||
No throttle - New Alltrax, solenoid, cables | Electric Club Car | |||
removed all throttle cables and cart still revs up. | Gas EZGO | |||
throttle and governor cables | Gas EZGO |