GY6 conversation

871kevin · 11-06-2018, 07:08 AM

Hello. I’m new to this forum. I’m planning on putting a GY6 motor in my electric EZGO. I’m looking for ideas on how to mount the gy6 shaft to the input shaft of the cart axle? Thanks

bruce_leroy · 12-04-2018, 02:08 PM

You can use sprockets and chain drive it. Depending on the final drive it may need a jackshaft to get the ratios right.

rifter · 12-06-2018, 06:34 AM

What GY6? 50cc to 250cc, you will not be happy with a small engine,,, but I have an addiction for faster and bigger so build it, I'll watch.

roncoinc · 05-02-2019, 09:23 PM

Gy6 in the search box brings up nothing,,then i find this and it's a dead end.
a complete 150cc is so cheap it seems like a good option for a yard cart with not much money spent.
guess i'll keep looking and see what comes up.

raydhd · 05-02-2019, 09:28 PM

Half the displacement of a stocker while doing an engine swap ? WHY ?

bruce_leroy · 05-03-2019, 10:52 AM

Yup 150cc is too small. I'd say 250cc minimum. I got a 18 hp chinese 250cc ATV/bike engine off ebay for $700 new and put it in my cart. I wouldn't go any smaller than that. Mine will do 30 mph.

11-06-2018, 07:08 AM	#1
871kevin Not Yet Wild Join Date: Oct 2008 Posts: 3	GY6 conversation Hello. I’m new to this forum. I’m planning on putting a GY6 motor in my electric EZGO. I’m looking for ideas on how to mount the gy6 shaft to the input shaft of the cart axle? Thanks
871kevin Not Yet Wild Join Date: Oct 2008 Posts: 3

12-04-2018, 02:08 PM	#2
bruce_leroy Not Yet Wild Join Date: Aug 2018 Posts: 19	Re: GY6 conversation You can use sprockets and chain drive it. Depending on the final drive it may need a jackshaft to get the ratios right.
bruce_leroy Not Yet Wild Join Date: Aug 2018 Posts: 19

12-06-2018, 06:34 AM	#3
rifter rifter Join Date: Nov 2007 Location: Orlando Florida Posts: 4,055	Re: GY6 conversation What GY6? 50cc to 250cc, you will not be happy with a small engine,,, but I have an addiction for faster and bigger so build it, I'll watch.

05-02-2019, 09:23 PM	#4
roncoinc Not Yet Wild Join Date: Aug 2017 Posts: 61	Re: GY6 conversation Gy6 in the search box brings up nothing,,then i find this and it's a dead end. a complete 150cc is so cheap it seems like a good option for a yard cart with not much money spent. guess i'll keep looking and see what comes up.
roncoinc Not Yet Wild Join Date: Aug 2017 Posts: 61

05-02-2019, 09:28 PM	#5
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: GY6 conversation Half the displacement of a stocker while doing an engine swap ? WHY ?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-03-2019, 10:52 AM	#6
bruce_leroy Not Yet Wild Join Date: Aug 2018 Posts: 19	Re: GY6 conversation Yup 150cc is too small. I'd say 250cc minimum. I got a 18 hp chinese 250cc ATV/bike engine off ebay for $700 new and put it in my cart. I wouldn't go any smaller than that. Mine will do 30 mph.
bruce_leroy Not Yet Wild Join Date: Aug 2018 Posts: 19

Similar Threads
Thread	Forum
Conversation 3pg to 4 stroke	Gas EZGO
Charger choices for conversation to 48v	Electric Club Car
99 txt 4 stroke hei conversation	Gas EZGO
06 Precedent 8 volt conversation	Electric Club Car
98 txt non pds conversation to pds	Electric EZGO