Sprocket for EZGO transaxle

rokcrlr · 01-06-2011, 10:54 AM

I thought I read a post about someone finding a hub or sprocket that will fit the EZGO input shaft splines on the rear axle. But I couldn't find it. I have a 96 Tuff 1 and am doing a little head scratching for an engine. I have a 500 ninja engine sitting here but I do know I would have to overdrive to the rear axle.Just in the research stage right now. I don't have either clutch so the options are open. And I really don't need a 60 hp engine,other than the cool factor. Can you still be cool at 56?But I have a 16 clone also that I am eyeing also.

richie · 01-06-2011, 05:35 PM

try this.....dennis kirk part #0872911 or 3221028. supposidly fits a polaris 4x4 front drive assy.Good luck

Gearhead1956 · 01-07-2011, 11:39 AM

If your thinking about using the MC engine you may want to mount the engine first. I just put a GSXR 600 engine in my cart. the splines on input shaft do not lineup with trans. sprocket, just my 2cents. good luck

rokcrlr · 01-07-2011, 01:11 PM

The 500 is a 2 cyclinder engine and about 2/3 as wide as the 600 4 cyclinders. But I haven't checked alignment yet, still in the think stages. But thanks

01-06-2011, 10:54 AM	#1
rokcrlr Gone Wild Join Date: Sep 2010 Location: Decatur,IL Posts: 553	Sprocket for EZGO transaxle I thought I read a post about someone finding a hub or sprocket that will fit the EZGO input shaft splines on the rear axle. But I couldn't find it. I have a 96 Tuff 1 and am doing a little head scratching for an engine. I have a 500 ninja engine sitting here but I do know I would have to overdrive to the rear axle.Just in the research stage right now. I don't have either clutch so the options are open. And I really don't need a 60 hp engine,other than the cool factor. Can you still be cool at 56?But I have a 16 clone also that I am eyeing also.

01-06-2011, 05:35 PM	#2
richie ZZGONE Join Date: May 2008 Location: central florida Posts: 656	Re: Sprocket for EZGO transaxle try this.....dennis kirk part #0872911 or 3221028. supposidly fits a polaris 4x4 front drive assy.Good luck Last edited by richie; 08-25-2022 at 03:25 PM..

01-07-2011, 11:39 AM	#3
Gearhead1956 Gone Wild Join Date: Dec 2010 Location: Woodstock,GA Posts: 1,088	Re: Sprocket for EZGO transaxle If your thinking about using the MC engine you may want to mount the engine first. I just put a GSXR 600 engine in my cart. the splines on input shaft do not lineup with trans. sprocket, just my 2cents. good luck

01-07-2011, 01:11 PM	#4
rokcrlr Gone Wild Join Date: Sep 2010 Location: Decatur,IL Posts: 553	Re: Sprocket for EZGO transaxle The 500 is a 2 cyclinder engine and about 2/3 as wide as the 600 4 cyclinders. But I haven't checked alignment yet, still in the think stages. But thanks

Similar Threads
Thread	Forum
looking for a 1988 ezgo transaxle diagram	Electric EZGO
Transaxle Swap/Yamaha Transaxle, Good Deal?	Lifted Golf Carts
Looking For Transaxle Sprocket Adaptor?	Bike & ATV Engine Swaps
EZGO 36V Spicer Rear Transaxle	Golf Carts and Parts
Sprocket adaptor and EZGO shifter axle	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum