![]() |
![]() | #1 |
Not Yet Wild Join Date: Mar 2016
Posts: 7
| ![]() Read and read and read till my eyes bled, and finally landed on a strategy for painting my plastic top. Washed with Dawn and hot water, dried overnight then red Scotch Brite both sides inside and out. Done right, it is a time conning job for sure. Washed with Dawn and hot water again and dried overnight. Today, used duplicolor prep spray do clean and remove any remaining oil/wax if any. Then sprayed the whole piece with Duplicolor adhesion promoter and immediately laid down first coat of Krylon Fusion Satin black. Three more coats an done. I used 5 cans total of the paint. More than I thought I would need but it went on very nicely. So $15 in plastic and about $60 in paint and prep my top turned out better than expected. Now, on to the longevity test?????? I'll report back. |
![]() | ![]() |
![]() | |
![]() __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
![]() | #2 |
Cave Dweller ![]() ![]() Join Date: Apr 2013 Location: Always On The Move
Posts: 7,525
| ![]() looks good |
![]() | ![]() |
![]() | #3 |
Gone Wild ![]() ![]() Join Date: Dec 2013 Location: SE Louisiana
Posts: 257
| ![]() Makeshift paint booth is impressive Sent from my SAMSUNG-SM-N910A using Tapatalk |
![]() | ![]() |
![]() | #4 | |
Not Yet Wild Join Date: Mar 2016
Posts: 7
| ![]() Quote:
Sent from my SM-N920V using Tapatalk | |
![]() | ![]() |
![]() | #5 |
Not Yet Wild ![]() Join Date: Jul 2015
Posts: 45
| ![]() like the black and white look. the black seats and top bring it together Nice |
![]() | ![]() |
![]() | #6 |
Not Yet Wild Join Date: Mar 2016
Posts: 22
| ![]() Looks great. How many cans of adhesion promoter did you use? |
![]() | ![]() |
![]() | #7 |
Not Yet Wild Join Date: Mar 2016
Posts: 7
| ![]() Just one can. I talked to some that applied it to heavy and advised me to lighten up a bit. It flashed super quick and the paint laid on it really nice. The satin finish fusion was just the ticked. A perfect match to the gutter dow spouts. It is day two and hardening nicely so I am holding out hope this was the way to go. Sent from my SM-N920V using Tapatalk |
![]() | ![]() |
![]() | #8 |
Not Yet Wild ![]() Join Date: Oct 2016 Location: South GA
Posts: 73
| ![]() How is this holding up? |
![]() | ![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() | ||||
Thread | Forum | |||
New to me 2010 Yamaha Drive JW2-308##### | Electric Yamaha | |||
2010 Yamaha Drive Transaxle Oil Change | Electric Yamaha | |||
2010 Yamaha Drive Battery Cable Issue | Electric Yamaha | |||
2010 Yamaha Drive Motor Upgrade | Electric Yamaha |