lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint


Post New Thread  Reply
Thread Tools Display Modes
Unread 09-14-2009, 08:14 AM   #11
Gone Wild
 
master66's Avatar
E-Z-GO
 
Join Date: May 2009
Location: Marysville Wa
Posts: 679
Default Re: prep work for painting plastic bodies

Adhesion promoter is typically sprayed on just like paint,with a spray gun or out of a bomb can, I have however read on the label that you can apply it by brush if you want but would not recomend this option as it will not come out smooth.
master66 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-14-2009, 08:51 AM   #12
Gone Wild
 
popatop's Avatar
E-Z-GO
 
Join Date: Jun 2008
Location: Raytown, Missouri
Posts: 895
Default Re: prep work for painting plastic bodies

Thanks Kevin good info
popatop is offline   Reply With Quote
Unread 09-26-2009, 08:57 PM   #13
Gone Wild
 
cheapjeep2's Avatar
Club Car
 
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,525
Default Re: prep work for painting plastic bodies

Good Info, How would I hand this one. Have a cart that was originally white, someone painted it blue but did not prep it well so now parts of it is flaking off the front cowl in big pieces. Then the person who owned it before, tried to do so a just a crappy repair and just BOMB right over the body that was showing as well as the flaking paint.

So what's best to deal with the flaking paint that is on the cart, sand it? Do I take it down to plastic, how do I know if after I go through all the steps you suggest, I won't run into problems with the original paint job still flaking.

Thanks!
cheapjeep2 is offline   Reply With Quote
Unread 09-27-2009, 05:42 PM   #14
Not Yet Wild
Yamaha
 
Join Date: Sep 2009
Location: Alexandria, KY
Posts: 1
Default Re: prep work for painting plastic bodies

I have an Old G1 that has the plastic front cowl, with some cracks in it, is thier anyway to repair this plastic? i am going to be doing some fiberglass work on the rear end but what can i do for the front

Thanks Travis
Moremph is offline   Reply With Quote
Unread 09-27-2009, 07:43 PM   #15
Gone Wild
 
dougmcp's Avatar
 
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
Default Re: prep work for painting plastic bodies

Mods-Lock this thread and make people start their own.
dougmcp is offline   Reply With Quote
Unread 04-01-2010, 07:28 AM   #16
Not Yet Wild
 
clayton6870's Avatar
Club Car
 
Join Date: Aug 2009
Location: Fayetteville, NC
Posts: 23
Default Re: prep work for painting plastic bodies

Did I read this right? I spray adhesion promoter on and then use the wax and grease clear afterward? Won't this remove the AP???
clayton6870 is offline   Reply With Quote
Unread 04-01-2010, 08:12 AM   #17
Gone Wild
 
master66's Avatar
E-Z-GO
 
Join Date: May 2009
Location: Marysville Wa
Posts: 679
Default Re: prep work for painting plastic bodies

Good catch Clayton I think I got a little ahead of myself there, to much typing.
You do not need to wipe it down with wax and grease after the adhesion promoter. I usually let my adhesion promoter sit for about 30 min at 60 to 70degrees then prime.
master66 is offline   Reply With Quote
Unread 04-02-2010, 04:12 PM   #18
Gone Wild
 
goofymaz's Avatar
 
Join Date: Mar 2010
Posts: 237
Default Re: prep work for painting plastic bodies

? i found a adhesion promotor that is also a plastic primer! can i use this? its a bomb can and im painting my cart with automotove paint with a gun but this is the only adhesive promotor i can find!
goofymaz is offline   Reply With Quote
Unread 04-02-2010, 04:23 PM   #19
Not Yet Wild
 
clayton6870's Avatar
Club Car
 
Join Date: Aug 2009
Location: Fayetteville, NC
Posts: 23
Default Re: prep work for painting plastic bodies

The adhesion promoter I found from Dupli-Color said it was a primer also. I shot 2 coats of it and let it dry around 20 mins and then hit it with rustoleum black primer.
clayton6870 is offline   Reply With Quote
Unread 04-02-2010, 06:09 PM   #20
Gone Wild
 
goofymaz's Avatar
 
Join Date: Mar 2010
Posts: 237
Default Re: prep work for painting plastic bodies

k sounds good thanks!!! should i be priming my cart a specific color or does that not mayyer so much? im painting my cart metallic frost blue! its a light blue
goofymaz is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint


Thread Tools
Display Modes


Similar Threads
Thread Forum
krylon no prep Body and Paint
Any tips on painting the raw plastic roof? Body and Paint
paint prep Body and Paint
Paint prep question Gas EZGO
How to Prep my cart Electric EZGO


All times are GMT -5. The time now is 08:43 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.