lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint


Post New Thread  Reply
Thread Tools Display Modes
Unread 05-01-2018, 09:11 AM   #61
Gone Wild
 
master66's Avatar
E-Z-GO
 
Join Date: May 2009
Location: Marysville Wa
Posts: 691
Default Re: prep work for painting plastic bodies

You guys would have better luck getting answers to your questions if you start a thread in the body and paint section of the design center thread.
master66 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-25-2018, 08:19 PM   #62
Not Yet Wild
 
Join Date: Jan 2011
Posts: 7
Default Re: prep work for painting plastic bodies

Have not seen mention of it so not if it is needed.
Any recommendation if a flex additive is suggested for painting the plastic nody parts?
rjracin240 is offline   Reply With Quote
Unread 07-27-2018, 09:27 AM   #63
Gone Wild
 
master66's Avatar
E-Z-GO
 
Join Date: May 2009
Location: Marysville Wa
Posts: 691
Default Re: prep work for painting plastic bodies

I personally do not put flex additive in the paint when I do golf carts. That is not to say you couldn't but there are only a couple areas on a body that could flex enough to crack the paint. This is just my personal preference though.
master66 is offline   Reply With Quote
Unread 02-14-2019, 02:26 PM   #64
Not Yet Wild
 
MrRudog's Avatar
Yamaha
 
Join Date: Jan 2019
Location: Seaton, Illinois 61476
Posts: 62
Default Re: prep work for painting plastic bodies

My '83 G1 and I thank you Master, and all others, for this excellent thread!
I've learned a wealth of information for my paint project. I was so used to painting metal and wood, I would have overlooked a few steps.
Especially the adhesion promoter area. Mine wasn't done right, and if I push on the front cowl, the paint literally cracks and falls off. Must've used cheap rattle can paint.
So, once again thank all of you for my daily schooling!
You rock!!!
MrRudog is offline   Reply With Quote
Unread 02-14-2019, 02:49 PM   #65
Gone Wild
 
master66's Avatar
E-Z-GO
 
Join Date: May 2009
Location: Marysville Wa
Posts: 691
Default Re: prep work for painting plastic bodies

You bet Ruddog glad we could help.
master66 is offline   Reply With Quote
Unread 02-21-2019, 08:54 PM   #66
Gone Wild
 
Goober11's Avatar
Club Car
 
Join Date: Jun 2018
Location: Richmond,Virginia
Posts: 236
Default Re: prep work for painting plastic bodies

Master66, I followed all your advice on the preparation work on painting a cart. For my first paint job I think It turned out pretty good. Had a little trouble with the clear coat but It buffed out ok.

I am starting another rebuild. This body is not bad but it does have holes in the front body (Club Car DS). What would you recommend to repair these small holes. Some one installed head lights. 5/16 holes. Thanks again for the great write up.
Goober11 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint


Thread Tools
Display Modes


Similar Threads
Thread Forum
krylon no prep Body and Paint
Any tips on painting the raw plastic roof? Body and Paint
paint prep Body and Paint
Paint prep question Gas EZGO
How to Prep my cart Electric EZGO


All times are GMT -5. The time now is 01:26 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.