|
08-18-2010, 10:38 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2010
Posts: 2
|
Spray Painting Steps
I am sanding down my metal 1984 ezgo body for painting. I got It down to 400 grit right now. I am going to use spray rattle cans to paint Blue. I was planning on just using rustoleum. I know I need to primer, base, and clear. But what are the exact steps in order, I cant find exactly what to do its all scattered around. So..... 3 light coats metal prime, then wetsand with 1000 grit? then lights coats of base color till its were you want it?
Mainly I dont understand The whole prime sand prime sand prime sand wetsand prime again wetsand again. Can someone just let me know all the staright steps. Thanks for the help |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-20-2010, 08:02 AM
|
#2 |
|
Gone Wild
Join Date: May 2009
Location: Marysville Wa
Posts: 699
|
Re: Spray Painting Steps
Welcome to BGW first of all. Let me ask you what kind of shape the body is in to start with. Is there bodywork to be done, or is it in good shape and you pretty much just need to sand it and paint? There are alot of people that end up doing way more work than they really need so that is why I ask.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Steps to Take painting | Electric EZGO | |||
| paints steps | Body and Paint | |||
| Spray painting EMT for top supports | Design Center | |||
| painting w/ spray gun???? | Body and Paint | |||
| small steps | Gas EZGO | |||
Linear Mode
