![]() |
| | #1 |
| Not Yet Wild Join Date: Mar 2011 Location: Dalton, GA
Posts: 57
| Looking to paint my 1997 EZGO TXT roof black (currently white). Any suggestions on the correct type of coating or process? I tried Krylon Fusion but it immediately fish-eyes. |
| | |
| | |
| __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
| | #2 |
| Not Yet Wild Join Date: May 2009 Location: South Dakota
Posts: 12
| I used a black marine paint purchased at Menards. Took a couple coats but worked great. |
| | |
| | #3 |
| Getting Wild Join Date: Mar 2011 Location: indiana
Posts: 94
| tops usually have a release agent on them.( so they don't stick to mold when they are made)Use scotch brite to scuff surface and go to auto body store and buy primer that is made for that it comes in spray can or gallon.If you don't use this primer it will look good at first but peel off after a while |
| | |
| | #4 |
| Not Yet Wild Join Date: Feb 2011
Posts: 21
| I to am thinking of painting the top of my G2 .What is this primer you speak of?ordinary or something special? |
| | |
| | #5 |
| Getting Wild Join Date: Mar 2011 Location: indiana
Posts: 94
| It is a special primer. If you go to a auto body paint store and tell what you are using it for they can hook you up.Sorry but can't remember what it is called.It has a special etcher in it. |
| | |
| | #6 |
| Getting Wild Join Date: Mar 2011 Location: Hurley, MS
Posts: 89
| http://www.fivestarbodies.com/index.php?p=product&id=9 This is what I use to prep plastic bumpers for race cars, it works great. |
| | |
| | #7 |
| Gone Wild Join Date: Jan 2010 Location: Tampa, Fl
Posts: 475
| I first gave it a good wash with a scotch rite pad. Then used Adhesive promoter which help paint adhere to plastic. Then Dupilicolor paint & clear. It has held up great. |
| | |
| | #8 |
| Not Yet Wild Join Date: Mar 2011 Location: Dalton, GA
Posts: 57
| How did you apply the primer and/or the adhesive promoter? Unfortunately, the only thing I don't have is a sprayer. I was going to have to rely on rattle cans. |
| | |
| | #9 |
| Not Yet Wild Join Date: Feb 2011
Posts: 21
| |
| | |
| | #10 |
| Not Yet Wild Join Date: Mar 2011
Posts: 16
| dupont aslo has a prep wash and a product called plas-stick u just wash the plastic with the prep wash and then use the plas-stick prior to priming and painting. we use it all the time at work painting plastic parts works great |
| | |
![]() |
| ||||||
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Help with painting the roof | Body and Paint | |||
| painting top | Electric Club Car | |||
| Any tips on painting the raw plastic roof? | Body and Paint | |||
| Roof Painting Question | Gas Yamaha | |||
| Painting Roof | Body and Paint | |||