lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint


Post New Thread  Reply
Thread Tools Display Modes
Unread 05-02-2011, 09:37 AM   #1
Feral
 
Unforgiven's Avatar
Mixed Breed
 
Join Date: Feb 2011
Location: Central Miss
Posts: 1,758
Default Stressed,........on cracks

got stress cracks in my fiber glass,....before I paint how do I need to fix these? Thought I'd get some marine tech and patch from inside but still afraid they will show back up. looked to buy a new front but can't find any for a cushman hawk,.......
Unforgiven is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-02-2011, 10:16 AM   #2
Vegas modded 420
 
sho305's Avatar
Yamaha
 
Join Date: Jun 2009
Location: West MI
Posts: 14,376
Default Re: Stressed,........on cracks

You have to grind them out unfortunately. If they are small odds are just in the gelcoat and not the FG. Then fill them back in with glass or duraglass, and finish with standard autobody products. If you go into the glass you should put glass back in (cloth) and taper it wider. If the panel flexes there a lot try to beef it up inside. The thinner the paint/gelcoat on it the less it will want to crack.
sho305 is offline   Reply With Quote
Unread 08-05-2011, 01:34 AM   #3
Gone Wild
 
BumbleBee's Avatar
Mixed Breed
 
Join Date: Apr 2010
Location: Latonia KY
Posts: 603
Default Re: Stressed,........on cracks

something else to do if you have a crack. before you do any grinding or cutting, take a drill and a small bit and drill a hole on both ends of the crack. that will stop the crack from progressing. as far as the cracks themselves, you can also just bevel the edges and then fill them in with resin, mat, or duraglass. as far as reinforcing you can epoxy some pieces of sheet metal on the back side to add strength.

Hope that helps.

Arin
BumbleBee is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint


Thread Tools
Display Modes


Similar Threads
Thread Forum
Top causing cracks in fiberglass Gas EZGO
Frame Cracks Question Gas Club Car
repairing cracks in plastic Body and Paint


All times are GMT -5. The time now is 05:30 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.