12-14-2014, 10:14 PM | #1 |
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
My clone belt turns over when running any help
So I was running the cart a week or 2 ago and all of the sudden the cart felt weird so I lifted the seat and the belt turned inside out for no reason I have the clutches all in line and there doesn't seem like nothing's in a bind but the belt was worthless after that
I bought everything from Geoff so I know nothing is mis matched or what not Anyone have any opinions 04 ez with 420 predator 94c clutch with a stock driven and the belt came from Vegas |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-15-2014, 07:42 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: My clone belt turns over when running any help
The only time I've ever heard of that happening is when the clutches were not properly aligned. Sometimes if the engine flexes during acceleration the clutches will temporarily come out of alignment, depending upon which way the engine moves. I've seen where a homemade cradle was off just a hair and when it flexed the belt would rub and wear funky. In those scenarios it's possible to see a belt flip.
|
12-15-2014, 10:36 AM | #3 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,642
|
Re: My clone belt turns over when running any help
I have belts flip on cars due to something kicking up into them.Were you off road when this happened?
|
12-15-2014, 02:38 PM | #4 |
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
Re: My clone belt turns over when running any help
Yea I was offroad the first time it happened flexing it out in a retention pond and the second time was on the asphalt
I'm going to check the alighnment of it again come to think about it, it seemed like the belt was binding a little when I would start out on the cart |
12-15-2014, 08:06 PM | #5 |
Gone Wild
Join Date: Jun 2012
Location: Central NY
Posts: 1,020
|
Re: My clone belt turns over when running any help
Once a belt turns inside out, replace it. But you need to figure why it did in the first place so you don't ruin another one.
|
12-16-2014, 03:21 PM | #6 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: My clone belt turns over when running any help
|
|
|
Similar Threads | ||||
Thread | Forum | |||
clone running rough , backfiring at startup | Clone Engine Swaps | |||
2002 ez go gas cart runs and clutch belt turns in N but not in F or R | Gas EZGO | |||
starter turns but belt wont | Gas Club Car | |||
Clone 94c setup and belt type? | Clone Engine Swaps | |||
belt issues on honda clone | Big Block Talk! |