|
08-10-2015, 10:39 AM
|
#1 |
|
Gone Wild
Join Date: Oct 2010
Location: Central New York
Posts: 812
|
best pulse line placement?
What's the best spot for the pulse line. I have it off the carb manifold but it doesn't put out as good as the valve cover hole I had in my old one. What's the best way to drill out the cover? There looks to be a two way flap in it. Do you drill through it on the side maybe?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-10-2015, 11:05 AM
|
#2 |
|
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: best pulse line placement?
When I had my clone I had it running to the spacer in between the carb and block. I couldn't even tell you how many times It ran out of gas. The only time I could get a decent pulse was when the carb plate was closed. I later drilled a hole in the valve cover and epoxied a 1/4 barb in it. Worked good. I would drill it on the top left. Make sure you go all the way through.
|
|
|
|
|
08-10-2015, 11:13 AM
|
#3 |
|
Gone Wild
Join Date: Oct 2010
Location: Central New York
Posts: 812
|
Re: best pulse line placement?
thanks
|
|
|
|
|
08-10-2015, 12:22 PM
|
#4 |
|
friends call me Boke
 Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: best pulse line placement?
I may have an old valve cover with the barb in it already you can have for free.
|
|
|
|
|
08-10-2015, 04:55 PM
|
#5 |
|
Gone Wild
Join Date: Oct 2010
Location: Central New York
Posts: 812
|
Re: best pulse line placement?
Thanks that's very nice of you!! I drilled the cover threaded a barb in and it works great!!! Appreciate the offer though!!!
|
|
|
|
|
08-10-2015, 08:10 PM
|
#6 |
|
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: best pulse line placement?
I put mine in the side almost over the exhaust. Its the center spot the partition is against the outside. I bought a 1/8npt to barb fitting, the tap drill for that is not that big, just screw it in carefully. I put some permatex on it iirc.
http://www.buggiesgonewild.com/clone...tml#post756892 |
|
|
|
|
08-10-2015, 08:13 PM
|
#7 |
|
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,628
|
Re: best pulse line placement?
JEEZ am I the only guy that carb spacer works well for?
|
|
|
|
08-12-2015, 07:26 PM
|
#8 |
|
Not Yet Wild
Join Date: Nov 2011
Location: Down South East
Posts: 17
|
Re: best pulse line placement?
Carb spacer works great for me. No problems yet.
|
|
|
|
|
08-12-2015, 07:32 PM
|
#9 |
|
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: best pulse line placement?
The other clone I did has the spacer pulse. Once it came off and pumped fuel all over the place. I don't really like it and will convert it some day.
|
|
|
|
|
08-12-2015, 10:16 PM
|
#10 |
|
Gone Wild
Join Date: Jun 2012
Location: Central NY
Posts: 1,020
|
Re: best pulse line placement?
Mine is in the adapter plate between the carb and block. Has worked perfect for me since day one. Weird...
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| fuel pump pulse line | Clone Engine Swaps | |||
| pulse line on g1 | Gas Yamaha | |||
| fuel pump pulse line | Gas Yamaha | |||
| Puking Oil from pulse line | Gas Club Car | |||
| Oil in pulse line for fuel pump | Gas Club Car | |||
Linear Mode
